Aftermarket oil filters, hydraulic filters, head gaskets and solenoids cross-referenced to Kubota part numbers. Each part page lists the Kubota number it replaces alongside the equivalent numbers from other brands, so you can check the match before you order.
Kubota 19202-53020 is a fuel injector for the Kubota D850, D950, D1005, D1302 and D1402 engines. This aftermarket version is made to the same mounting and connections as the original,...
Kubota 19202-53021 is the complete pintle type injector with its nozzle holder, return fitting and inlet stud. It is used on Kubota D850 and V1902 engines. This aftermarket version is...
Kubota 1C010-60015 is the 12 volt fuel stop solenoid with mounting flange, plunger, moulded boot and sealed plug. It is used on Kubota M series tractors. This aftermarket version has...
Kubota 1C010-60016 is the 12 volt fuel stop solenoid with mounting flange, plunger, moulded boot and sealed plug. It is used on Kubota M series tractors. This aftermarket version has...
Kubota 1C010-74110 is the six blade engine cooling fan with its steel hub and four hole mounting. It is used on Kubota V3600 engines. This aftermarket version is made to...
Kubota 1C020-03602 is the cylinder head gasket for the Kubota V3300 four cylinder diesel engine. This aftermarket version is cut to the same bore, bolt hole and water passage pattern...
Kubota 1E013-35013 is an oil pump for the Kubota D1703, D1803, V2003, V2203, V2403 and WG2503 diesel engines. This aftermarket version is made to the same mounting and connections as...
Kubota 1E141-73033 is a water pump for the Kubota V2203. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old...
Kubota 1G514-03310 is the cylinder head gasket for the Kubota V3800 four cylinder diesel engine. This aftermarket version is cut to the same bore, bolt hole and water passage pattern...
Kubota 1G524-63011 is the 12 volt starter motor with 9 tooth pinion, solenoid and mounting flange. It is used on Kubota V3307 engines. This aftermarket version has the same mounting...
Kubota 1G574-17013 is the TD04HL turbocharger: a wastegated unit with the actuator and its boost hose, a cast iron turbine housing and an aluminium compressor housing. It is used on...
Kubota 1G772-60010 is a fuel stop solenoid for the Kubota V3007 engines and M5040DT and M6040DT tractors. This aftermarket version has the same mounting and electrical connector as the original,...
Kubota 1G790-03310 is the cylinder head gasket for the Kubota V2003, V2203 and V2403 four cylinder diesel engines. This aftermarket version is cut to the same bore, bolt hole and...
Kubota 1G790-03312 is the cylinder head gasket for the Kubota V2003, V2203 and V2403 four cylinder diesel engines. This aftermarket version is cut to the same bore, bolt hole and...
Kubota 1G825-64010 is an alternator for the Kubota D902 engines (BX2350 and similar compact tractors). This aftermarket version has the same mounting and electrical connector as the original, so it...
Kubota 1G825-64012 is an alternator for the Kubota D902 engines (BX2350 and similar compact tractors). This aftermarket version has the same mounting and electrical connector as the original, so it...
Kubota 1G925-60011 is a fuel stop solenoid for the Kubota V1903 Bobcat S130 S150 S160 S175 S185. This aftermarket version has the same mounting and electrical connector as the original,...
Kubota 1G928-73034 is a water pump for the Kubota V2403 and D1803 engines (M6040, L4701, L4760 and L6060 tractors). This aftermarket version is made to the same mounting and connections...
Kubota 1J501-17013 is the TD04HL turbocharger: a wastegated unit with the actuator and its boost hose, a cast iron turbine housing and an aluminium compressor housing. It is used on...
Kubota 1J700-03313 is the cylinder head gasket for the Kubota V2607 four cylinder diesel engine. This aftermarket version is cut to the same bore, bolt hole and water passage pattern...
Kubota 1J773-17013 is the complete TD04L4 turbocharger with wastegate actuator and oil line, ready to fit. It is used on Caterpillar D series skid steer and compact track loaders. This...
Kubota 1K321-73030 is the engine coolant water pump with housing, bearing, shaft and impeller. It is used on Kubota V2403 engines. This aftermarket version is made to the same mounting...
Kubota 1K576-73030 is the engine coolant water pump with alloy housing, hub flange, impeller and gasket. It is used on Kubota D1105 and V1505 engines. This aftermarket version is made...
Kubota 1K576-73032 is the engine coolant water pump with alloy housing, hub flange, impeller and gasket. It is used on Kubota D1105 and V1505 engines. This aftermarket version is made...
Join and we put 200 points on your account, worth
$10 off an order over $75 USD. Then a point
for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and
that is you in with your 200 points waiting. Joining signs you up to
our emails and you can leave any time from the link in any of them.
See our terms and conditions.
You are in. Want the good stuff?
Member deals, specials before they go public, and easy ways to stack up points.
Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send.
See our terms and conditions.
Nice one. You are on the list.
We will only bother you when it is worth it: a member deal, a specials drop, a way
to earn points faster, or a heads up that a part you bought is due.
You are on the list. Now grab your 200 points
Join Marty Mates and we put 200 points on your account, worth
$10 off an order over $75 USD. Then a point for
every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
