No Products in the Cart
about us
Your order: what happens before, during and after
How we find and list parts, place your order with the manufacturer, check and photograph it in our warehouse, and ship it to you with...
Read more
Practical, spec-based guides to identifying, cross-referencing and maintaining industrial filters, air-oil separators, hydraulic elements and laser cutting consumables. Written from the data behind our catalogue.
How we find and list parts, place your order with the manufacturer, check and photograph it in our warehouse, and ship it to you with...
Read more
Streaks, rings or dark spots left on a fiber laser window after cleaning: which a better pass removes, which mean replace, and what else spoils...
Read more
Check the oil level, read the SPN 100 codes and prove the pressure with a mechanical gauge before you replace an oil pressure sensor or...
Read more
Match the seal ring to your SUP, Qilin, WSX, Ospri or Hanwei gun, fit it without damage and check the red light before the first...
Read more
Speed and position sensors have no hours interval. What shortens their life, the signs one is failing, and how to test it before you buy...
Read more
Clean fiber laser windows and lenses with lens tissue: blow the dust off, wet the sheet, one slow pass, fresh sheet every time. Two methods,...
Read more
Fit a screw compressor intake cartridge with no dust on the clean side: match diameter, bore and height, seat the seal by hand, reset the...
Read more
Laser nozzles have no fixed life. Pierce spatter, crashes and an off centre beam wear them out. The signs a nozzle is due and a...
Read more
Bracket sensors seat and bolt with no gap to set; threaded pickups need the gap set by hand. Fitting steps, connector care and first start...
Read more
Full-flow filters protect the circuit, bypass filters polish the oil. When to run one or both, and why a bypass filter never replaces the main...
Read more
Protective windows die from pierce spatter, dirty assist gas, fingerprints, worn seals and the wrong power rating. How to fix each one and track window...
Read more
Change a hydraulic filter element cleanly: match the designation and collapse rating, release pressure, clean the housing, oil the O-ring, vent and check.
Read more
Fit a screw compressor separator right: vent and lock out, clean faces, keep the grounding staple, cross-tighten the cover, scavenge tube to the cup.
Read moreJoin and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
