No Products in the Cart
Aftermarket ceramic nozzle holder for Trumpf universal cutting heads. Replaces Trumpf 1906032, the universal nozzle holder M12 (Trumpf designation Nozzle Holder 2D Ceramic M12 CL 8kW).
One holder takes standard, BrightLine and CoolLine M12 nozzles, so the head can use every nozzle type and the nozzle changer without swapping holders. The holder routes the water mist to CoolLine nozzles, which is what CoolLine uses for cutting thick mild steel.
The ceramic body is 41 mm across at the top, 24 mm at the base and 34 mm high, with a stainless M12 nozzle insert. Sold in packs of 1, 5 or 10.
| Replaces | Trumpf 1906032 (universal nozzle holder M12) |
| Nozzle Thread | M12 |
| Top Diameter | 41 mm |
| Base Diameter | 24 mm |
| Height | 34 mm |
| Takes | Standard, BrightLine and CoolLine M12 nozzles |
| Trumpf Rating | 8 kW |
| Material | Technical ceramic, stainless steel nozzle insert |
| Pack Options | 1 pack, 5 pack, 10 pack |
Trumpf machines
Trumpf machines with the universal cutting head. Takes standard, BrightLine and CoolLine M12 nozzles.
| Pack | Dimensions | Trumpf Part No.(SPM Part No.) | Fits |
|---|---|---|---|
| M12 thread, 41 mm top diameter, 24 mm base diameter, 34 mm high | M12 thread, 41 mm top diameter, 24 mm base diameter, 34 mm high | 1906032(SPM-LAS-2158) | Any Trumpf universal cutting head with the M12 nozzle holder |
CoolLine thick plate cutting
CoolLine sprays a water mist around the cut on thick mild steel. The holder has to seal properly for the mist to reach the nozzle.
After a collision
A head crash usually cracks the ceramic holder first. A spare gets the machine cutting again within minutes.
Height sensing errors
A cracked or contaminated holder upsets the capacitive height control. Replace the holder before recalibrating.
Found this part cheaper elsewhere? Send us the listing and we will beat it under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes. Like the Trumpf 1906032 it takes standard, BrightLine and CoolLine M12 nozzles.
Check for 1906032 on the old holder or in your parts list. It has an M12 nozzle thread and is 41 mm across the top and 34 mm high.
No. It is an aftermarket holder made to the same dimensions and thread. The Trumpf part numbers are shown so you can match the holder on your machine.
It is the same holder in each. The 10 pack has the lowest price per holder, which suits shops that keep spares for collisions.
Yes. Shipping options and costs for your country are shown at checkout.
