No Products in the Cart
| Filtration Media | Inorganic Microfibers 12 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 12 µm |
| Flow direction | In-Out |
| Total Height | 200 mm (7 7/8") |
| Largest Inner Diameter | 75 mm (2 15/16") |
| Smallest Inner Diameter | 8.3 mm (5/16") |
| Outer Diameter | 72 mm (2 27/32") |
| Largest Outer Diameter | 72.5 mm (2 27/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Digoema | DGMH3DCC10 |
| Donaldson | CRS12002 |
| Donaldson | P171824 |
| Fai Filtri | R-100-3-A10-A |
| Fairey Arlon | TXW3D10 |
| Fairey Arlon | TXW3D10B |
| Fairey Arlon | TXW3DCC10 |
| Fairey Arlon | TXW3DGDL10 |
| Fleetguard | HF35119 |
| Grove | 3325701 |
| Hydreco | EL32B1 |
| Hydreco | EL40B1 |
| Hydrema | 7100291 |
| Ikron | HEK0820200ASFG010B |
| Ikron | HHC01680 |
| Mann-Filter / Mann & Hummel | C66 |
| Oxfil | HF.9264 |
| Parker Parfit | 937785Q |
| Parker Parfit | PR4396 |
| Parker Parfit | TXW3D10BQA |
| Sofima (UFI) | CRC130FD1 |
| Sofima (UFI) | ERF13NFC |
| Sotras | SH8104 |
| Spare Part Mart | SPM-HYD-1806 |
| Vickers | FT1003A10A |
| Vickers | VTXW3DBC10 |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Heavy-Duty Dusty Environments
In construction, mining, or agricultural settings where airborne dust and debris are prevalent, the 12-micron inorganic microfibre media traps fine particulates that can score hydraulic components, extending service intervals and preventing premature wear on pumps and cylinders.
Continuous Operation Cycles
For production machinery or mobile hydraulics running around the clock, consistent filtration is critical to maintain oil viscosity and cleanliness. This filter's high dirt-holding capacity supports uninterrupted operation, reducing the risk of unplanned downtime.
Fleet Inventory Simplification
Managing filters for mixed-brand equipment fleets can be complex. This single aftermarket element replaces filters from multiple manufacturers, allowing you to consolidate inventory and reduce the chance of ordering errors.
This filter is a direct replacement for hydraulic filters from brands including Donaldson, Parker Parfit, Vickers, Mann-Filter, and others listed in the cross-reference. Always verify dimensions and port sizes for your specific housing.
The filter uses inorganic microfibre media with a rating of 12 µm (micron). This high-efficiency media captures fine contaminants, extending hydraulic component life and improving system reliability.
The filter has an outer diameter of 72 mm, total height of 200 mm, and a stepped inner diameter with a largest ID of 75 mm and smallest ID of 8.3 mm. Compare these against your existing filter to confirm compatibility.
This filter is manufactured to the original dimensions and ratings for fit, form, and function. It offers identical filtration performance at a fraction of the cost, making it a sensible choice for routine maintenance.
Installation follows standard procedures: depressurise the system, remove the old filter, lubricate the new seal with clean hydraulic oil, and spin on until the seal contacts, then tighten according to manufacturer recommendations. Start the system and check for leaks.
Spare Part Mart provides a 30-day money-back guarantee on this filter. If you find a lower price elsewhere, our price-beat guarantee applies. We ship worldwide with tracking to ensure your order arrives safely.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
We will also tell you when that part is due again. A couple of emails a month, and you can stop them from any one of them.
WELCOME10
Use it on your first order. Check your email and confirm the address so we can send you the reminders too.
