No Products in the Cart
| Filtration Media | Inorganic Microfibers 12 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 12 µm |
| Flow direction | In-Out |
| Total Height | 580 mm (22 13/16") |
| Largest Inner Diameter | 92 mm (3 5/8") |
| Smallest Inner Diameter | 10.3 mm (13/32") |
| Largest Outer Diameter | 126 mm (4 31/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Airfil | AFPOVL4510 |
| Digoema | DGMH11097X |
| Donaldson | P763873 |
| Fai Filtri | R-630-4A-A10-A |
| Finn Filter | FC1297F010BS |
| Finn Filter | FC1297Q010BS |
| Fleetguard | HF35130 |
| Fleetguard | ST1327 |
| Oxfil | HF.9429 |
| Parker Parfit | TXW8D10 |
| Parker Parfit | TXW8D10B |
| Parker Parfit | TXW8DCC10 |
| Parker Parfit | TXW8DGDL10 |
| Sotras | SH8166 |
| Spare Part Mart | SPM-HYD-1868 |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Dusty Construction Environments
Earthmoving and quarrying equipment constantly ingests airborne dust that enters hydraulic reservoirs. This filter’s 12-micron inorganic microfibre media captures silt-sized particles before they score cylinder rods and pumps, significantly extending component life in these abrasive conditions.
Continuous Production Line Hydraulics
Hydraulic power units running 24/7 in factories rely on consistent oil cleanliness to avoid unplanned downtime. The filter’s generous size, with a total height of 580 mm and large outer diameter, provides high dirt-holding capacity, allowing longer service intervals and fewer stoppages on automated assembly lines.
Mixed-Fleet Inventory Simplification
Workshops maintaining diverse equipment from multiple OEMs benefit from cross-brand compatibility. This single filter replaces elements from Donaldson, Fleetguard, Parker, and others, reducing shelf space and ordering complexity by letting you standardise on one part number across multiple machines.
Precision Moulding and Pressing Equipment
Injection moulding machines and hydraulic presses need microscopically clean oil to prevent valve stiction and surface defects on finished parts. Maintaining 12-micron cleanliness with this filter safeguards both machine repeatability and final product quality.
Verify your current filter cross-references with any of the supported brands: Donaldson, Parker Parfit, Fleetguard, Airfil, Digoema, Fai Filtri, Finn Filter, Fleetguard-ST, Oxfil, or Sotras. Then check the dimensions: total height 580 mm, largest outer diameter 126 mm, largest inner diameter 92 mm, and smallest inner diameter 10.3 mm. A match ensures correct fit.
The element is rated at 12 microns and uses inorganic microfibre media. This captures fine particles as small as 12 microns in size, protecting hydraulic components from contaminant-induced wear.
The filter is designed for housings that accept its specific dimensions: 580 mm total height, 126 mm largest outer diameter, 92 mm largest inner diameter, and 10.3 mm smallest inner diameter. Flow direction is in-to-out. Compare these measurements with your existing element to confirm compatibility.
It is an aftermarket filter built to match the performance of the cross-referenced brands. The same 12-micron inorganic microfibre media ensures consistent filtration. Your purchase is risk-free with our 30-day money-back guarantee and price-beat promise.
Installation is straightforward. Depressurise the system, remove the old element, clean the housing, insert the new filter with correct flow orientation (in-to-out), replace the cover, and bleed air from the system. No special tools are required.
We offer worldwide shipping with tracking on all orders. Every purchase includes a 30-day money-back guarantee and a price-beat guarantee, so you can buy with confidence.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
By entering your email you agree to our terms and conditions.
WELCOME10
Tap below and it is applied to your basket automatically, so you will not need to type it at checkout. Check your email and confirm the address and we will tell you when that part is due again.
Apply it and keep shopping
