No Products in the Cart
| Filtration Media | Impregnated Paper 10 µm |
| Media type | Impregnated Paper |
| Filtration Rating | 10 µm |
| Total Height | 199.5 mm (7 27/32") |
| Bypass Valve Opening Pressure | 0.3 bar (4 PSI) |
| Smallest Inner Diameter | 32.8 mm (1 9/32") |
| Outer Diameter | 70 mm (2 3/4") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Argo | P3072062 |
| Baldwin | PT9157 |
| Digoema | DGMH1090 |
| Fai Filtri | 025-4-1311 |
| Imer | 526013700 |
| Liebherr | 51060645 |
| Oxfil | OF.8345 |
| Spare Part Mart | SPM-OIL-1194 |
| Woodgate | WGH3062 |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Continuous-Duty Operation
For equipment running long shifts, the 10 µm filtration rating helps maintain oil cleanliness, reducing wear on engine components. The bypass valve ensures oil flow even if the filter becomes partially blocked during extended use.
Cold-Weather Starts
In cold climates, thick oil can strain filters. The 0.3 bar bypass valve opens to allow oil to circulate quickly, protecting the engine from oil starvation during startup.
Fleet Maintenance Consolidation
If your fleet includes Imer or Liebherr machines, this single filter part number can simplify inventory. Its standardized dimensions (199.5 mm height, 70 mm OD) fit multiple models, reducing stock complexity.
High-Contaminant Environments
In dusty or dirty job sites, the impregnated paper media traps particles as small as 10 µm, preventing abrasive debris from circulating and extending engine life.
Check your equipment's manual for the required oil filter dimensions and bypass valve pressure. This filter has a total height of 199.5 mm, outer diameter 70 mm, smallest inner diameter 32.8 mm, and bypass valve opening at 0.3 bar. It is a direct replacement for filters used in Imer and Liebherr machinery.
This filter uses impregnated paper media with a filtration rating of 10 µm. It is designed to capture fine particles while allowing adequate oil flow.
The smallest inner diameter is 32.8 mm, which often corresponds to the thread size or mounting hole. The outer diameter is 70 mm and total height is 199.5 mm. Verify your filter head's thread specification against these dimensions.
This is an aftermarket filter built to the original dimensions and ratings. It is a direct replacement for filters from brands such as Argo, Baldwin, Digoema, Fai Filtri, Imer, Liebherr, Oxfil, and Woodgate. It is not a genuine OEM part but offers comparable performance.
Installation is similar to any spin-on oil filter. Apply a thin coat of clean oil to the gasket, screw the filter on until the gasket contacts the mounting surface, then tighten an additional 3/4 turn. Do not overtighten. Always check for leaks after installation.
We offer worldwide shipping with tracking. Your purchase is backed by a 30-day money-back guarantee and a price-beat guarantee. If you find a lower price on an identical product, we will match it.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
By entering your email you agree to our terms and conditions.
WELCOME10
Tap below and it is applied to your basket automatically, so you will not need to type it at checkout. Check your email and confirm the address and we will tell you when that part is due again.
Apply it and keep shopping
