No Products in the Cart
Kubota 1J700-03313 is the cylinder head gasket for the Kubota V2607 four cylinder diesel engine. This aftermarket version is cut to the same bore, bolt hole and water passage pattern as the original.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Cylinder Head Gasket |
| Replaces | Kubota 1J700-03313 |
| Engine | Kubota V2607 |
| Cylinders | 4 |
| Fits | Kubota V2607 four cylinder diesel engines |
| Condition | New, aftermarket |
| Stat. HS-Code | 848410 |
Kubota machines
Check the part number on your old unit before ordering.
| Kubota Part No.(SPM Part No.) | Fits |
|---|---|
| 1J700-03313(SPM-HEP-2914) | Kubota V2607 four cylinder diesel engines |
Coolant in the oil or oil in the coolant
Milky oil, oil in the radiator or a falling coolant level with no outside leak are classic signs of a failed head gasket.
Overheating and pressure in the cooling system
Combustion gas pushed into the water jacket pressurises the radiator, blows coolant out of the overflow and makes the engine run hot under load.
Low compression and white smoke
A gasket blown between cylinders or into a water passage shows as a misfire, low compression on one or two cylinders and white smoke at start up.
Fitting tips
Check the head and block for flatness, clean both faces, use new head bolts where the engine maker calls for them and tighten in sequence to the specified torque.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| Yannal Part | USD 37.00 | 6 Oct 2026 |
| YEM Parts | USD 62.27 | 6 Oct 2026 |
| eBay (2 aftermarket sellers) | USD 152.00 to 153.95 | 6 Oct 2026 |
| Spare Part Mart | USD 29.60 | Today |
Our price of USD 29.60 is 20% to 81% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of Kubota 1J700-03313. It is not made by or affiliated with Kubota; the Kubota part number is used only to show what it replaces.
It fits Kubota V2607 four cylinder diesel engines. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It is cut to the same bore, bolt and water passage pattern as the original. Clean both faces flat and dry, fit it without sealant unless the engine maker calls for it, and tighten the head bolts in the maker's sequence and torque.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
