No Products in the Cart
| Filtration Media | Inorganic Microfibers 12 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 12 µm |
| Total Height | 630 mm (24 13/16") |
| Smallest Inner Diameter | 85 mm (3 11/32") |
| Outer Diameter | 152 mm (5 31/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Digoema | DGMH52316 |
| Donaldson | P784037 |
| Fai Filtri | 001-6-0318 |
| Fleetguard | HF35329 |
| Liebherr | 5610345 |
| Liebherr | 5920142 |
| Liebherr | 7368770 |
| Liebherr | 7369260 |
| Liebherr | 7371513 |
| Liebherr | 7371525 |
| Liebherr | 7373880 |
| Liebherr | 7373881 |
| Liebherr | 7374324 |
| Oxfil | OF.8053 |
| Regeltechnik | 066152300P |
| Regeltechnik | 066152300PL |
| Regeltechnik | B66152300PL |
| Regeltechnik | B66152326P |
| Sotras | SH8233 |
| Spare Part Mart | SPM-OIL-1074 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-OIL-1074.
High-Dust Mining Environments
In open-pit mining operations, airborne dust and debris can quickly clog standard filters. The 12 µm inorganic microfibre media captures fine particles while maintaining oil flow, extending engine life between service intervals.
Continuous-Duty Construction Equipment
For excavators and loaders running 12+ hours daily, this filter's large 630 mm height provides extended dirt-holding capacity, reducing the frequency of filter changes and minimising downtime on busy job sites.
Cold-Weather Starting Protection
In sub-zero climates, thick oil can bypass less efficient filters. The inorganic microfibre construction resists media collapse under cold-start pressure, ensuring consistent filtration from the first crank.
Fleet Inventory Consolidation
Workshop managers servicing mixed fleets of Liebherr and other equipment can standardise on this single filter cross-referenced across eight brands, simplifying stock control and reducing the risk of fitting the wrong part.
Check your equipment's parts manual for the original filter part number. If it matches any of the cross-referenced brands (Digoema, Donaldson, Fai Filtri, Fleetguard, Liebherr, Oxfil, Regeltechnik, Sotras), this SPM-OIL-1074 is a direct replacement. For specific model queries, contact our support team with your machine's serial number.
The filter uses inorganic microfibre media with a 12 µm filtration rating. This media is designed for high-efficiency particle capture while allowing adequate oil flow for engine protection.
Total height is 630 mm, outer diameter is 152 mm, and smallest inner diameter is 85 mm. Thread specifications are not provided in our data; please verify with your existing filter or consult your machine manual to ensure compatibility.
This is an aftermarket filter built to match OEM specifications. It is a direct replacement for the listed brands but is not sourced from the original equipment manufacturer. It offers comparable performance at a lower cost.
Installation follows standard oil filter procedures: drain old oil, remove the old filter, clean the mounting surface, lubricate the new filter's gasket, hand-tighten, then refill with oil and check for leaks. Always follow your machine's service manual for torque specifications.
We offer worldwide shipping with tracking. Your purchase is covered by a 30-day money-back guarantee and our price-beat guarantee ensures you get the best value.
