No Products in the Cart
| Filtration Media | Inorganic Microfibers 25 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 25 µm |
| Total Height | 201 mm (7 29/32") |
| Bypass Valve Opening Pressure | 2.5 bar (36 PSI) |
| Smallest Inner Diameter | 28.6 mm (1 1/8") |
| Outer Diameter | 62.5 mm (2 15/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Atlas (Terex) | 6081134 |
| Behr | 4451841121 |
| Fai Filtri | 025-4-0809 |
| Fleetguard | HF35364 |
| Fuchs | 5003650379 |
| Grove | 934204108 |
| Grove | 9437100798 |
| Hyster | 110893 |
| Oxfil | OF.8322 |
| Parker Parfit | 934204 |
| SLH | 16000645 |
| Spare Part Mart | SPM-OIL-1177 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-OIL-1177.
Heavy-Duty Construction Sites
In dusty construction environments, the 25 µm filtration rating captures fine abrasive particles, protecting engine components from wear. The 2.5 bar bypass valve ensures oil circulation even if the filter becomes partially clogged, preventing engine starvation during demanding operations.
Continuous-Duty Industrial Equipment
For machinery running extended shifts, the inorganic microfibers media offers consistent filtration efficiency over long service intervals. This reduces the frequency of filter changes, lowering maintenance downtime and operational costs.
Cold Climate Start-Ups
The bypass valve opens at 2.5 bar, allowing oil to bypass the filter when cold oil is too thick to pass through the media. This protects the engine by ensuring immediate lubrication during cold starts, preventing dry starts and potential damage.
Fleet Maintenance Consolidation
With cross-references to multiple brands including Atlas (Terex), Fleetguard, and Parker Parfit, this filter simplifies inventory management. One part number can serve various equipment, reducing stock complexity and the risk of using incorrect filters.
Check your equipment's owner manual or existing filter part number. SPM-OIL-1177 is a direct replacement for filters used in Atlas (Terex) machinery. If your filter matches the dimensions (height 201 mm, outer diameter 62.5 mm, smallest inner diameter 28.6 mm) and has a 2.5 bar bypass valve, it is compatible.
The 25 µm rating indicates the filter captures particles larger than 25 microns. This is suitable for standard engine oil filtration, removing most harmful contaminants while allowing good oil flow. Inorganic microfibers provide high dirt-holding capacity and consistent efficiency.
The SPM-OIL-1177 has a smallest inner diameter of 28.6 mm, outer diameter of 62.5 mm, and total height of 201 mm. These dimensions must match your filter housing. The bypass valve opening pressure is 2.5 bar. Verify these specifications against your original filter before purchase.
SPM-OIL-1177 is an aftermarket filter built to match OEM specifications. It uses inorganic microfibers media with a 25 µm rating and a 2.5 bar bypass valve, similar to many original filters. While not OEM, it offers reliable performance at a competitive price.
Installation is standard: drain oil, remove old filter, clean mounting surface, lubricate gasket, hand-tighten new filter (usually 3/4 to 1 turn after gasket contacts), then refill oil. Do not overtighten. Check for leaks after starting the engine.
We offer worldwide shipping with tracking. Your purchase is covered by a 30-day money-back guarantee and our price-beat guarantee. If you find a lower price on the same aftermarket filter, we will beat it.
