No Products in the Cart
| Collapse pressure | 10 bar (145 PSI) |
| Filtration Media | Inorganic Microfibers 12 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 12 µm |
| Flow direction | In-Out |
| Total Height | 290 mm (11 13/32") |
| Largest Inner Diameter | 92 mm (3 5/8") |
| Smallest Inner Diameter | 10.3 mm (13/32") |
| Largest Outer Diameter | 126 mm (4 31/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Allis Chalmers | 1300930 |
| Allis Chalmers | 4910983 |
| Baldwin | PT289 |
| Baldwin | PT28910 |
| Baldwin | PT290 |
| Clark Michigan | 060168 |
| Clark Michigan | 60158 |
| Clark Michigan | AW060175 |
| Coopers | HEM6064 |
| Donaldson | P172892 |
| Donaldson | P550133 |
| Donaldson | P779507 |
| Fai Filtri | 065-4-0022 |
| Fluitek | P260720B6 |
| Fluitek | P260730B6 |
| Fluitek | P260740B6 |
| Fram | C1696 |
| Fram | C1697 |
| Fram | C1697PL |
| Fram | C1701 |
| Franklin | 1503007 |
| Hastings | HF727 |
| Hastings | HF995 |
| Spare Part Mart | SPM-HYD-1052 |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
High-Contamination Environments
In dusty or debris-heavy work sites, the 12 µm inorganic microfibre media effectively traps fine particles, preventing premature wear on pumps and valves. This filter helps maintain system efficiency even under heavy contamination loads.
Continuous-Duty Hydraulic Systems
For equipment running long shifts, the 10 bar collapse pressure provides a safety margin against pressure surges. This filter supports consistent oil flow and protection during extended operation.
Fleet Maintenance Consolidation
With cross-references to multiple major brands, this filter simplifies inventory management for mixed fleets. One part number covers machines using Allis Chalmers, Baldwin, Donaldson, and other common filters.
Cold-Weather Startups
The inorganic microfibre media maintains filtration efficiency even with higher viscosity oil during cold starts. This reduces the risk of contaminant bypass when the system is most vulnerable.
Check your current filter's part number against the cross-reference list: Allis Chalmers, Baldwin, Clark Michigan, Coopers, Donaldson, Fai Filtri, Fluitek, Fram, Franklin, and Hastings. If your filter matches one of these brands, this filter is a direct replacement.
This filter uses inorganic microfibre media with a 12 µm filtration rating. It is designed to capture fine particulates while allowing high flow rates.
The total height is 290 mm, largest outer diameter is 126 mm, largest inner diameter is 92 mm, and smallest inner diameter is 10.3 mm. Measure your existing filter to ensure these dimensions match.
This is an aftermarket filter built to the original dimensions and ratings. It is a direct replacement for the listed brands but is not a genuine OEM product.
Installation is straightforward: remove the old filter, clean the mounting surface, lubricate the gasket, and hand-tighten the new filter. Do not use tools to over-tighten. Always follow your equipment's manual.
We offer worldwide shipping with tracking, a 30-day money-back guarantee, and a price-beat guarantee. If you find a lower price on an identical product, we will match it.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
We will also tell you when that part is due again. A couple of emails a month, and you can stop them from any one of them.
WELCOME10
Use it on your first order. Check your email and confirm the address so we can send you the reminders too.
