Aftermarket oil filters, hydraulic filters, foot switches and switches cross-referenced to Genie part numbers. Each part page lists the Genie number it replaces alongside the equivalent numbers from other brands, so you can check the match before you order.
Genie 07160312, direct aftermarket replacement. This hydraulic filter provides reliable fluid cleanliness for hydraulic systems that specify a 12 µm inorganic microfibre element. Its Out-In flow path and robust collapse...
Genie 105387 is the 24 volt DC pump motor. It is used on Genie GR, QS and TMZ lifts. This aftermarket version has the same mounting and electrical connector as...
Genie 121615GT is the 12 volt throttle solenoid with its mounting bracket, rubber boot and three wire lead. It is used on Genie S and Z booms with Deutz 2011...
Genie 122512 is a key switch kit for the Genie S-40 S-45 S-60 S-65 S-80 S-85 Z-34-22 IC Z-30-20N Z-45-22 Z-60-34. This aftermarket version has the same mounting and electrical...
Genie 122517 is the three position key selector that switches control between the platform and the ground controls, with off in the middle. It is used on Genie S-100 to...
Genie 128200 is the three position sealed toggle switch for the platform controls. It is used on Genie S and Z series boom lifts. This aftermarket version has the same...
Genie 128201 is the two position momentary sealed toggle switch (DPDT) for the platform controls. It is used on Genie S and Z series boom lifts. This aftermarket version has...
Genie 128202 is the three position momentary sealed toggle switch (DPDT) for the platform controls. It is used on Genie S and Z series boom lifts. This aftermarket version has...
Genie 128205 is a toggle switch for the Genie Z-45/25J DC, Z-60/34, S-45, S-80 and S-85 boom lifts. This aftermarket version has the same mounting and electrical connector as the...
Genie 128206 is the three position maintained sealed toggle switch (DPDT) for the platform controls. It is used on Genie S and Z series boom lifts. This aftermarket version has...
Genie 128334 is a dc motor controller for the Genie Z-30/20N articulated boom lifts. This aftermarket version has the same mounting and electrical connector as the original, so it plugs...
Genie 128337 is a dc motor controller for the Genie Z-45/25J DC boom lifts. This aftermarket version has the same mounting and electrical connector as the original, so it plugs...
Genie 128375 is the onboard 48 volt 30 amp battery charger. It is used on Genie 48 volt DC scissor and boom lifts. This aftermarket version has the same mounting...
Genie 139709 is a starter motor for the Genie GS-5390 GS-4390 GS-3390 Z-135-70. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in...
Genie 20780 is the 12 volt two speed throttle solenoid. It is used on Genie Z series boom lifts with Kubota DF750, DF752 or WG750 engines. This aftermarket version has...
Genie 20880, direct aftermarket replacement. This filter is an aftermarket hydraulic filter designed as a direct replacement for Baldwin, Donaldson, Duplomatic, Fai Filtri, Genie, Ikron, Omt, and Oxfil units. It...
Genie 20880-GT, direct aftermarket replacement. This filter is an aftermarket hydraulic filter designed as a direct replacement for Baldwin, Donaldson, Duplomatic, Fai Filtri, Genie, Ikron, Omt, and Oxfil units. It...
Genie 220063, direct aftermarket replacement. This cartridge is a direct replacement air filter cartridge designed for a wide range of industrial rotary screw compressors and other equipment. With a total...
Genie 220063GT, direct aftermarket replacement. This cartridge is a direct replacement air filter cartridge designed for a wide range of industrial rotary screw compressors and other equipment. With a total...
Genie 227516 is the platform foot switch that the operator holds down to enable the drive and boom functions. It is used on Genie S series telescopic and Z-60/34 articulated...
Genie 227617 is the platform foot switch that the operator holds down to enable the drive and boom functions. It is used on Genie S and Z series boom lifts....
Genie 228457 is a starter motor for the Genie S-60XC S-60X S-65 Z-62-40. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in...
Genie 228466GT is the platform foot switch that the operator holds down to enable the drive and boom functions. It is used on Genie S series telescopic and Z-60/34 articulated...
Genie 24495 is the single axis proportional joystick with knob handle, rubber boot, control board with heat sink and terminal strip. It is used on Genie S series telescopic and...
Join and we put 200 points on your account, worth
$10 off an order over $75 USD. Then a point
for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and
that is you in with your 200 points waiting. Joining signs you up to
our emails and you can leave any time from the link in any of them.
See our terms and conditions.
You are in. Want the good stuff?
Member deals, specials before they go public, and easy ways to stack up points.
Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send.
See our terms and conditions.
Nice one. You are on the list.
We will only bother you when it is worth it: a member deal, a specials drop, a way
to earn points faster, or a heads up that a part you bought is due.
You are on the list. Now grab your 200 points
Join Marty Mates and we put 200 points on your account, worth
$10 off an order over $75 USD. Then a point for
every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
