No Products in the Cart
Aftermarket replacement oil pressure switch for JCB backhoe loaders. It replaces JCB part number 701/80591 / 701/80319 / 701/M7305 / 701/80459 / 701/80626: the two pin engine oil pressure switch that turns on the low oil pressure warning.
Fits JCB 2CX, 3CX and 4CX backhoe loaders, JCB 214, 215, 216 and 217, and 1400B to 1700B (check the number on your old switch). It is built to the same mounting, wiring and connector layout as the part it replaces, so it fits in place of the old one without changes to the machine.
Check the part number on the label of the old unit, or in the parts manual for your machine's serial number range, before ordering. Sold as a single unit, shipped worldwide.
| Part Type | Oil Pressure Switch |
| Replaces | JCB 701/80591 / 701/80319 / 701/M7305 / 701/80459 / 701/80626 |
| Connector | 2 pin plug, black housing |
| Body | Zinc plated steel hex body with threaded port |
| Fits | JCB 2CX, 3CX and 4CX backhoe loaders, JCB 214, 215, 216 and 217, and 1400B to 1700B (check the number on your old switch) |
| Condition | New, aftermarket |
| Stat. HS-Code | 853650 |
JCB machines and engines
Check the part number on your old unit before ordering.
| Pack | JCB Part No.(SPM Part No.) | Fits |
|---|---|---|
| 1 Piece | 701/80591 / 701/80319 / 701/M7305 / 701/80459 / 701/80626(SPM-HEP-2657) | JCB 2CX, 3CX and 4CX backhoe loaders, JCB 214, 215, 216 and 217, and 1400B to 17 |
Oil pressure warning light stays on
With the oil level and pressure confirmed good by a test gauge, a warning light that stays on points to a failed switch.
No warning at all
A switch that never closes leaves the engine unprotected. If the light does not come on with the key on and the engine off, test the switch and its wire.
Leaking switch
Oil weeping from the switch body or thread means the seal has gone. Replace it before the engine loses oil.
Fitting tips
Fit with a new sealing washer or thread sealant suited to oil, tighten to the engine maker's torque and check for leaks with the engine running.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay, aftermarket seller | USD 18.50 | 5 Oct 2026 |
| Holdwell | USD 34.00 | 5 Oct 2026 |
| Spare Part Mart | USD 14.80 | Today |
Our price of USD 14.80 is 20% to 56% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of JCB 701/80591 / 701/80319 / 701/M7305 / 701/80459 / 701/80626. It is not made by or affiliated with JCB; the JCB part number is used only to show what it replaces.
It fits JCB 2CX, 3CX and 4CX backhoe loaders, JCB 214, 215, 216 and 217, and 1400B to 1700B (check the number on your old switch). Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It is made to the same mounting and connections as the original part. Fit new gaskets and seals where they are used, and check for leaks and correct operation before putting the machine back to work.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
