Aftermarket oil filters, oil pumps, head gaskets and water pumps cross-referenced to Isuzu part numbers. Each part page lists the Isuzu number it replaces alongside the equivalent numbers from other brands, so you can check the match before you order.
Isuzu 1-11310-199-0 is an oil pump for the Isuzu 6BG1 engines (Hitachi EX200-3C and EX200-5 excavators, TCM forklifts). This aftermarket version is made to the same mounting and connections as...
Isuzu 1-12365475-9 is the engine coolant pump: cast iron body, bearing and shaft, mechanical seal and impeller, with a two groove pulley and steel back plate. It is used on...
Isuzu 1-13100-244-1 is the gear type engine oil pump with cast body and splined drive shaft. It is used on Isuzu 6BD1 engines. This aftermarket version is made to the...
Isuzu 1-13610-804-0 is the engine coolant pump: cast iron body, bearing and shaft, mechanical seal and impeller, with a two groove pulley and steel back plate. It is used on...
Isuzu 1-13610817-1 is the complete water pump with cast iron body, outlet elbow, six bolt hub flange and back plate. It is used on Isuzu 6BD1 engines in Hitachi EX200...
Isuzu 1-13610944-0 is a water pump for the Isuzu 6SD1 engines (Hitachi EX300-2, EX300-3, EX350-3 excavators). This aftermarket version is made to the same mounting and connections as the original,...
Isuzu 1-13650-008-1 is the engine coolant pump: cast iron body, bearing and shaft, mechanical seal and impeller, with a two groove pulley. It is used on Isuzu 6SD1 engines. This...
Isuzu 1-13650-179-1 is the engine coolant pump: cast iron body, bearing and shaft, mechanical seal and impeller, with a two groove pulley, twin outlet flange and steel back plate. It...
Isuzu 1-13650016-1 is the complete water pump with cast iron body, outlet elbow, six bolt hub flange and back plate. It is used on Isuzu 6BD1 engines in Hitachi EX200...
Isuzu 1-13650068-1 is the engine coolant pump: cast iron body, bearing and shaft, mechanical seal and impeller, with flange hub. It is used on Hitachi EX300-5 excavators. This aftermarket version...
Isuzu 1-13770080-1 is the engine coolant thermostat with wax element, flange and jiggle stem. It is used on Isuzu 6WG1 engines. This aftermarket version is made to the same mounting...
Isuzu 1-81100-310-0 is the 24 volt starter motor with 11 tooth pinion, solenoid and mounting flange. It is used on Isuzu 6HK1 engines. This aftermarket version has the same mounting...
Isuzu 1-81100-324-0 is the 24 volt gear reduction starter motor with 11 tooth pinion, solenoid and harness. It is used on Isuzu 6HK1 engines in Hitachi ZX330 excavators. This aftermarket...
Isuzu 1-81100-3381 is a starter motor for the Isuzu 6BG1, 6HE1 and 6HH1 engines (Hitachi EX200, ZX200-3 excavators). This aftermarket version has the same mounting and electrical connector as the...
Isuzu 1-81100-401-3 is the gear reduction starter motor: a black field housing with an aluminium drive end, the solenoid mounted on top and a flange mount pinion housing. It is...
Isuzu 1-81100-432-0 is the 24 volt starter motor with 11 tooth pinion, solenoid and mounting flange. It is used on Isuzu 6UZ1 engines. This aftermarket version has the same mounting...
Isuzu 1-81200563-0 is the 24 V engine alternator with a twin groove V belt pulley, cooling fan and regulator lead. It is used on Hitachi EX400-3 excavators and KH series...
Isuzu 1-82410160-1 is the oil warning pressure switch with a threaded body and a two wire lead with bullet connectors. It is used on Isuzu engines in Hitachi excavators. This...
Isuzu 1-82410170-1 is the oil pressure sensor with a short twin wire lead to a two pin plug. It is used on Isuzu engines. This aftermarket version has the same...
Isuzu 1153003891 is a fuel injector for the Isuzu 6HK1 engines in Hitachi ZX330 and ZX350 excavators. This aftermarket version is made to the same mounting and connections as the...
Isuzu 1811001840 is a starter motor for the TCM FD100Z, FD35Z, FD35Z5 and FD38Z forklifts (Isuzu 6BD1 engine). This aftermarket version has the same mounting and electrical connector as the...
Isuzu 5-13610-038-1 is the engine coolant water pump with housing, bearing, shaft and impeller. It is used on Isuzu C240 engines. This aftermarket version is made to the same mounting...
Isuzu 5-13610-179-0 is the engine coolant water pump with housing, bearing, shaft and impeller. It is used on Isuzu C240 engines. This aftermarket version is made to the same mounting...
Isuzu 5-87311242-0 is the engine coolant pump: cast iron body, bearing and shaft, mechanical seal and impeller, with flange hub. It is used on Isuzu 4HK1 engines. This aftermarket version...
Join and we put 200 points on your account, worth
$10 off an order over $75 USD. Then a point
for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and
that is you in with your 200 points waiting. Joining signs you up to
our emails and you can leave any time from the link in any of them.
See our terms and conditions.
You are in. Want the good stuff?
Member deals, specials before they go public, and easy ways to stack up points.
Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send.
See our terms and conditions.
Nice one. You are on the list.
We will only bother you when it is worth it: a member deal, a specials drop, a way
to earn points faster, or a heads up that a part you bought is due.
You are on the list. Now grab your 200 points
Join Marty Mates and we put 200 points on your account, worth
$10 off an order over $75 USD. Then a point for
every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
