No Products in the Cart
| Filtration Media | Inorganic Microfibers 12 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 12 µm |
| Flow direction | Out-In |
| Total Height | 145.5 mm (5 23/32") |
| Largest Inner Diameter | 27.5 mm (1 3/32") |
| Largest Outer Diameter | 77 mm (3 1/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Digoema | DGMH3422 |
| Epe | 160L140H10SLP |
| Epe | 18140H10SLC000P |
| Epe | 18140H10XLC000P |
| Epe | DL40603E |
| Fai Filtri | CF-8-034-A10-HA |
| Fleetguard-ST | ST1629 |
| Internormen | 300801 |
| Mahle | 852034SMXVST10 |
| Oxfil | HF.7704 |
| Rexroth | R928018715 |
| Spare Part Mart | SPM-HYD-1302 |
| Stauff | SL035F10B |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1302.
Continuous-duty hydraulic circuits
In presses, injection moulders and other machinery that runs around the clock, the 12 µm microfibre media maintains low particle counts even during extended cycles. This reduces abrasive wear on close-tolerance spools and piston seals, keeping maintenance intervals long and unplanned downtime to a minimum.
Dusty or dirty plant environments
Foundries, quarries and wood processing plants expose hydraulic reservoirs to airborne dust. The SPM-HYD-1302 captures abrasive fines that enter through breathers or rod seals, helping systems retain their fluid quality between scheduled oil changes and reducing the risk of scoured internal surfaces.
Scheduled maintenance programs
Swapping filters on condition or by hours-run prevents accumulative damage. Because this element cross-references so many brand part numbers, maintenance teams can keep a single stock item that fits multiple machine assets, simplifying inventory and ensuring the right part is always on hand for planned shutdowns.
Inventory consolidation across mixed fleets
Facilities with equipment sourced from different OEMs often end up with a shelf full of filters that only fit one machine. The SPM-HYD-1302 covers Digoema, Internormen, Rexroth and six other brand equivalents, so you can rationalise your stores into one universal hydraulic element and free up shelf space.
This element is a direct cross-reference for hydraulic filters sold under the Digoema, Epe, Fai Filtri, Fleetguard-ST, Internormen, Mahle, Oxfil, Rexroth and Stauff brands. Always confirm your original part number matches one of these cross-references before ordering.
The inorganic microfibre construction provides a rigid, high-dirt-holding filter sheet that captures particles down to 12 microns. In hydraulic systems, this guards servo valves and proportional valves against silting, helping maintain consistent response and reducing the risk of stiction.
The SPM-HYD-1302 has a total height of 145.5 mm, a largest inner diameter of 27.5 mm and a largest outer diameter of 77 mm. Measure your housing cavity and compare. Hydraulic filter housings typically seal on the outer o-ring or a built-in gasket, so as long as those three dimensions match, the element will drop in.
No, it is an aftermarket direct replacement built to match the OEM specifications for form, fit and function. It delivers the same filtration efficiency and dirt-holding capacity without the OEM price tag and comes with Spare Part Mart's 30-day money-back guarantee.
Installation is straightforward: release system pressure, remove the housing bowl, extract the old element and check the bowl for debris. Insert the new filter, ensure it seats evenly and reassemble. Briefly jog the pump to check for leaks and top up oil if needed. Refer to your machine's service manual for the specific torque and bleed procedure.
We ship worldwide with tracking. Every SPM-HYD-1302 is covered by our 30-day money-back guarantee, and we offer a price-beat guarantee against any genuine equivalent. If you find a better advertised price, we will beat it.
Orders typically require 1–3 business days for processing. During this time, we confirm product availability and prepare the shipment for consolidation.
We offer two shipping tiers designed to meet your operational needs. The exact costs for all shipping options will be displayed at checkout.
Express Shipping (UPS, DHL, etc.)
Ideal for urgent needs. Estimated delivery time is typically 3–5 business days after processing.
Economy Shipping
Our standard, cost-effective option. Estimated delivery time is typically 5–10 business days after processing.
Shipping costs are calculated at checkout based on your location and selected shipping method.
Once your order ships, you'll receive a tracking number via email so you can monitor your delivery.
For detailed delivery information and FAQs, please visit our Delivery Information page or contact us.

