No Products in the Cart
| Collapse pressure | 10 bar (145 PSI) |
| Filtration Media | Wire Mesh 60 µm |
| Media type | Wire Mesh |
| Filtration Rating | 60 µm |
| Flow direction | Out-In |
| Height-1 | 1.5 mm (1/16") |
| Total Height | 205 mm (8 1/16") |
| Largest Inner Diameter | 94 mm (3 11/16") |
| Smallest Inner Diameter | 90 mm (3 17/32") |
| Outer Diameter | 145 mm (5 23/32") |
| Largest Outer Diameter | 150 mm (5 29/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Fai Filtri | CF-8-070-M60-NA |
| Fleetguard-ST | ST1639 |
| Internormen | 0485207060G16BP |
| Internormen | 306729 |
| Mahle | 852070DRG60 |
| Oxfil | HF.7738 |
| Parker Parfit | GO2931 |
| Parker Parfit | PR2931 |
| Spare Part Mart | SPM-HYD-1318 |
| Stauff | LL050B60B |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1318.
Continuous-Duty Industrial Systems
In manufacturing or processing lines that run 24/7, regular filter changes are critical. The robust wire mesh construction of this filter handles steady high flow rates while maintaining oil cleanliness, helping to reduce pump wear and unplanned downtime.
Dusty and Contaminated Environments
For mobile plant or construction equipment exposed to heavy dust and debris, the 60-micron mesh balances dirt-holding capacity and flow. It prevents premature clogging while effectively trapping larger particles, extending the life of hydraulic components.
Preventive Maintenance Scheduling
Fleet managers can plan more frequent service intervals without excessive expense by using this cost-effective replacement. It allows proactive hydraulic system care, keeping downtime low and maintenance budgets under control.
Multi-Brand Fleet Consolidation
Workshops servicing equipment from various manufacturers can standardise on this single filter that cross-references multiple major brands. This simplifies inventory management, reduces ordering complexity and ensures you always have the right filter on hand.
Because it cross-references Fai Filtri, Fleetguard-ST, Internormen, Mahle, Oxfil, Parker Parfit and Stauff, it is a direct replacement for any hydraulic system that uses those branded elements. Always confirm your existing filter’s dimensions match: 205 mm total height, 145/150 mm outer diameters, and 90/94 mm inner diameters.
The media is wire mesh with a 60-micron absolute rating. This is suitable for capturing larger contaminants in hydraulic circuits, offering a balance between effective particle removal and high flow capability. In some systems the mesh element can be cleaned and reused.
Total height is 205 mm, the main outer diameter is 145 mm (largest point 150 mm), and the inner diameters are 90 mm and 94 mm. Flow direction is out-in, meaning oil passes from outside to inside the filter. Ensure your housing can accommodate these measurements.
No, this is an aftermarket replacement engineered to match the specifications of the cross-referenced brands. It is not a genuine part but provides equivalent performance at a lower cost. It is covered by our 30-day money-back guarantee and price-beat guarantee.
Installation follows standard hydraulic filter replacement steps. Depressurise the system, remove the old element, lubricate the new seal with clean hydraulic oil, and spin on by hand until the gasket contacts the base, then tighten as recommended by the equipment manufacturer. Always refer to your machine’s service manual.
We offer worldwide shipping with tracking on all orders. Every Spare Part Mart filter comes with a 30-day money-back guarantee for peace of mind, plus our price-beat guarantee. No specific delivery times are stated; you will receive tracking details once your order ships.
