No Products in the Cart
| Element Collapse pressure | 10 bar (145 PSI) |
| Filtration Media | Inorganic Microfibers 7 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 7 µm |
| Flow direction | Out-In |
| Total Height | 424 mm (16 11/16") |
| Largest Inner Diameter | 113 mm (4 7/16") |
| Smallest Inner Diameter | 83.3 mm (3 9/32") |
| Largest Outer Diameter | 152 mm (5 31/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Airfil | AFKOVL3866 |
| Baldwin | H8020 |
| Baldwin | H9020 |
| Baldwin | PT9020 |
| Behringer | BE84001606A |
| Benford | 800444 |
| Comex | P8400D16N2006 |
| Comex | P8400D16N6 |
| Donaldson | P164836 |
| Donaldson | P164852 |
| Epe | 168400UH6SLS000P |
| Fai Filtri | CF-840-2-A06-NA |
| Fairey Arlon | R840H1606A |
| Filtersoft | H8416MCBL |
| Finn Filter | FC1362F005BS |
| Finn Filter | FC1362Q005BT |
| Finn Filter | FFPAVL11134B5ABS |
| Fleetguard | HF30181 |
| Fleetguard | HF7017 |
| Hy-Pro | HP84L166MB |
| Hycon | H840016005BN |
| Hydac | 10316R06BN |
| Hydac | 1269060 |
| Internormen | 0584006VG10PB16 |
| Internormen | 306538 |
| Mahle | 891028SMX6 |
| Mann-Filter / Mann & Hummel | HD16137 |
| Nelson | 87819N |
| Nuovo Pignone | RCO369524200 |
| Oxfil | HF.7908 |
| P&H Harnischfeger | 1046Z493 |
| Pall | HC8400FKN16H |
| Parker Parfit | FC1362Q005BS |
| Parker Parfit | GO2817 |
| Parker Parfit | PR4204 |
| PTI | P84150HFB |
| Schroeder | SBF840016S5B |
| Schroeder | SBF840016Z1B |
| Sofima (UFI) | 30351 |
| Sofima (UFI) | 30446 |
| Spare Part Mart | SPM-HYD-1404 |
| ST Separat Tech | 2840L06B16 |
| ST Separat Tech | 3840DGEB16 |
| ST Separat Tech | 8840L06B16 |
| Stauff | RP200E05B |
| Swft Filters Inc | SF8400166UM |
| Triboguard | 8400166UM |
| Woodgate | WGPN8416 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1404.
High-Pressure Hydraulic Circuits
In systems operating near rated pressure, the 10 bar collapse strength prevents element failure, keeping oil clean and safeguarding expensive components under demanding conditions.
Continuous-Duty Industrial Plant
For 24/7 manufacturing lines, the 7 micron microfibre media traps fine particulates that accelerate wear, extending pump life and reducing unplanned downtime.
Dusty or Dirty Environments
Mobile machinery on construction sites or quarries benefits from the high dirt-holding capacity of inorganic microfibres, lengthening service intervals and keeping maintenance costs down.
Fleet Maintenance Consolidation
When your site runs mixed-brand Hydac-compatible equipment, this single filter number replaces multiple branded part numbers, simplifying inventory and purchasing without sacrificing quality.
SPM-HYD-1404 is built to match OEM specifications for common Hydac hydraulic filter housings. Always check your existing element's dimensions and pressure rating: total height 424 mm, largest OD 152 mm, inner diameters 113 mm and 83.3 mm. If these match, the filter will fit.
It uses inorganic microfibre media with an absolute filtration rating of 7 micron. This level of filtration effectively removes silt-sized particles that cause abrasive wear in hydraulic systems.
The element stands 424 mm tall with a largest outer diameter of 152 mm. Inner diameters are 113 mm at the large end and 83.3 mm at the small end. While thread specifics are not provided, the seal interface is standard for Hydac-compatible elements.
No, SPM-HYD-1404 is a quality aftermarket filter manufactured to match OEM performance and dimensions. It is not produced by Hydac but serves as a cost-effective direct replacement.
First depressurise and drain the filter housing. Remove the old element, clean the housing bowl, then insert the new SPM-HYD-1404 ensuring correct orientation for Out-In flow. Lubricate seals with clean hydraulic oil, retighten the housing, and bleed air before restarting.
We offer worldwide shipping with tracking for your order. Every filter is covered by a 30-day money-back guarantee and our price-beat guarantee. If you find a lower price on an equivalent in-stock item, we will beat it.
Orders typically require 1–3 business days for processing. During this time, we confirm product availability and prepare the shipment for consolidation.
We offer two shipping tiers designed to meet your operational needs. The exact costs for all shipping options will be displayed at checkout.
Express Shipping (UPS, DHL, etc.)
Ideal for urgent needs. Estimated delivery time is typically 3–5 business days after processing.
Economy Shipping
Our standard, cost-effective option. Estimated delivery time is typically 5–10 business days after processing.
Shipping costs are calculated at checkout based on your location and selected shipping method.
Once your order ships, you'll receive a tracking number via email so you can monitor your delivery.
For detailed delivery information and FAQs, please visit our Delivery Information page or contact us.

