No Products in the Cart
| Filtration Media | Inorganic Microfibers 12 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 12 µm |
| Flow direction | Out-In |
| Total Height | 99.5 mm (3 29/32") |
| Largest Inner Diameter | 22.8 mm (29/32") |
| Largest Outer Diameter | 45 mm (1 25/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Doosan | K1009106 |
| Epe | 20040F10SLA000P |
| Epe | 20040H10SLA000P |
| Epe | 20040H10XLA000P |
| Fai Filtri | CF-DN-0040-A10-NA |
| Fleetguard-ST | ST2160 |
| Hydac | 0040DN010BN3HC |
| Hydac | 0040DN010BN4HC |
| Hydac | 0040DN010BNHC |
| Hydac | 1263637 |
| Internormen | 311433 |
| Internormen | 312211 |
| Mahle | 7925571 |
| Mahle | PI23004DNSMX10 |
| Mann-Filter / Mann & Hummel | HD506 |
| Oxfil | HF.8298 |
| Parker Parfit | FDAE1A10Q |
| Parker Parfit | GO4051 |
| Parker Parfit | PR4523 |
| Paus | 518952 |
| Sofrance | C2011D0Y0A |
| Spare Part Mart | SPM-HYD-1414 |
| Stauff | NL040E10B |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1414.
Continuous Duty in Excavation and Earthmoving
Hydraulic systems on excavators and loaders run at high pressure for entire shifts. The 12 µm microfibre media traps wear‑causing particles before they circulate, protecting close‑tolerance components. Consistent cleanliness helps avoid unscheduled downtime and extends the life of pumps and final drives.
Dusty Quarry and Mine Site Operations
In abrasive environments, airborne dust can enter the reservoir and rapidly degrade fluid quality. This filter holds a high dirt load without bypass, maintaining system protection through long service intervals. Fewer filter changes mean less exposure to contaminated surroundings and lower disposal volumes.
Fleet Service and Inventory Consolidation
With its broad cross‑reference list, a single part number covers multiple equipment makers. Workshops can reduce shelf stock and simplify reordering, while still having the correct filter on hand for Doosan and Hydac machines, as well as other equipment originally using the listed competitor elements.
Scheduled Maintenance on Mobile Hydraulic Systems
Replacing the filter at every fluid service interval restores full flow and filtration efficiency. The direct physical interchange with the OEM housing makes swap‑outs quick, and the aftermarket pricing keeps routine maintenance budgets manageable without compromising contaminant control.
This element is a direct physical match for the hydraulic filter housing found on compatible Doosan and Hydac equipment. It reproduces the original’s outer diameter, inner diameter and total height, so it drops straight in. Always confirm your machine’s required part number against our cross‑reference list before ordering.
The inorganic microfibre media removes 99.5% of solid particles 12 micrometres and larger. This absolute rating targets the fine silt that causes erosive wear in servovalves and variable‑displacement pumps. Maintaining fluid at this cleanliness level supports reliable operation and reduces internal leakage over the equipment’s life.
Yes. The total height is 99.5 mm, largest inner diameter 22.8 mm and largest outer diameter 45 mm. These critical envelope dimensions match the OEM specification for a secure fit. The out‑to‑in flow direction and element sealing surfaces replicate the original design, so there is no modification needed to the housing.
No. This is an aftermarket direct replacement manufactured to match the filtration performance and physical dimensions of the branded element. It is not produced by Doosan, Hydac or any of the cross‑referenced companies, but it delivers equivalent contaminant capture and dirt‑holding capacity in the same housing.
Installation follows standard procedures: relieve system pressure, remove the old element, clean the housing bore and sealing faces, lubricate the new seal with clean fluid and insert the filter. No special tools are required. Always prime the circuit and check for leaks after replacing the element. Refer to your machine’s service manual for torque values.
Every SPM-HYD-1414 is covered by our 30‑day money‑back guarantee. If the filter does not perform as expected, return it for a full refund. We also offer a price‑beat guarantee. Orders are dispatched with worldwide tracked delivery, so you can follow your shipment from our warehouse to your doorstep.
