No Products in the Cart
| Filtration Media | Inorganic Microfibers 7 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 7 µm |
| Flow direction | Out-In |
| Total Height | 160 mm (6 5/16") |
| Largest Inner Diameter | 40.5 mm (1 19/32") |
| Largest Outer Diameter | 78 mm (3 1/16") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Epe | 20160H6SLB000P |
| Epe | 20160H6XLB000P |
| Fai Filtri | CF-DN-0160-A06-HA |
| Fleetguard-ST | ST2192 |
| Hydac | 0160DN006BH |
| Hydac | 0160DN006BH3HC |
| Hydac | 0160DN006BH4HC |
| Hydac | 0160DN006BHHC |
| Hydac | 1268872 |
| Mahle | PI72016DNSMXVST6 |
| Oxfil | HF.8341 |
| Parker Parfit | FDBE1A05QH |
| Spare Part Mart | SPM-HYD-1420 |
| Stauff | NL160F06B |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1420.
High-Contamination Environments
Construction, mining, and agricultural machinery often operate in dusty conditions that load hydraulic fluid with abrasive particles. The 7-micron microfibre media captures these contaminants before they reach sensitive components, extending the service life of pumps and motors.
Continuous-Duty Hydraulic Systems
Production presses, injection moulding machines, and marine steering systems run around the clock. The SPM-HYD-1420 maintains low pressure drop over its service interval, ensuring consistent oil flow and preventing heat build-up that degrades fluid and seals.
Fleet and Multi-Machine Maintenance
Standardising on this filter across several Hydac-equipped units reduces inventory complexity. With cross-compatibility for multiple branded filters, a single part number covers many machines, simplifying ordering and lowering stockholding costs.
Preventative Maintenance Scheduling
Replacing filters at the recommended intervals is the most cost-effective way to avoid unplanned downtime. The SPM-HYD-1420 offers OEM-equivalent performance at an aftermarket price, making routine swaps economical without sacrificing protection.
This filter directly replaces Hydac elements and crosses to brands such as Epe, Mahle, and Parker Parfit. Verify your current filter against these cross-references, or check the dimensions: outer diameter 78 mm, height 160 mm, and inner diameter 40.5 mm. If they match, the SPM-HYD-1420 will fit.
The media is inorganic microfibre with an absolute filtration rating of 7 microns. This fine rating effectively removes silt-sized particles that cause progressive damage to hydraulic components, keeping fluid cleanliness within ISO code targets.
The total height is 160 mm, the largest outer diameter is 78 mm, and the largest inner diameter is 40.5 mm. Flow direction is Out-In, meaning fluid enters from the outside and exits through the centre. These dimensions are manufactured to seat firmly in standard Hydac housings.
The SPM-HYD-1420 is a premium aftermarket hydraulic filter. It is built as a direct replacement for OEM elements and provides dependable filtration without the brand premium. All SPM parts are backed by our 30-day money-back guarantee.
Depressurise the hydraulic system and remove the old filter. Clean the sealing surface, lubricate the new O-ring with clean hydraulic oil, and spin the filter on by hand until the gasket contacts the housing. Tighten a further half to three-quarters of a turn. Always consult your machine manual.
We provide worldwide shipping with tracking on every order. Your purchase is protected by a 30-day money-back guarantee. We also have a price-beat guarantee: if you find the same filter at a lower delivered price, we will beat it.
