No Products in the Cart
| Filtration Media | Inorganic Microfibers 25 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 25 µm |
| Flow direction | Out-In |
| Total Height | 158 mm (6 7/32") |
| Largest Inner Diameter | 40.4 mm (1 19/32") |
| Outer Diameter | 78 mm (3 1/16") |
| Largest Outer Diameter | 80 mm (3 5/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Epe | 20160F20SLA000P |
| Epe | 20160H20SLA000P |
| Epe | 20160H20XLA000P |
| Fai Filtri | CF-DN-0160-A25-NA |
| Fleetguard-ST | ST2177 |
| Hydac | 0160DN025BN |
| Hydac | 0160DN025BN3HC |
| Hydac | 0160DN025BN4HC |
| Hydac | 0160DN025BNHC |
| Hydac | 1268870 |
| Mahle | PI25016DNSMX25 |
| Oxfil | HF.8350 |
| Parker Parfit | FDBE1A20Q |
| Parker Parfit | GO4100 |
| Parker Parfit | PR3381 |
| Sofrance | C2021V0Y0A |
| Spare Part Mart | SPM-HYD-1421 |
| Stauff | NL160E25B |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1421.
Dusty Industrial Environments
Hydac-powered machinery operating in cement plants, mines, or quarries faces continuous dust and abrasive particle ingestion. This filter’s 25 µm inorganic microfibre media captures harmful debris, protecting pumps and valves from premature failure and maintaining consistent system pressure.
High-Cycle Manufacturing Lines
In automotive or food processing plants where hydraulic presses and conveyors run around the clock, uptime is critical. The SPM-HYD-1421 delivers long service intervals and predictable performance, helping you schedule maintenance without unexpected interruptions.
Preventive Maintenance Programs
Fleet managers and maintenance crews rely on scheduled replacements to avoid costly breakdowns. This filter’s precise dimensions and secure fit make it a straightforward choice for planned servicing, minimising downtime and extending fluid life across multiple Hydac systems.
Inventory Consolidation
Workshops servicing diverse equipment from brands like Hydac can reduce shelf complexity by using this multi-reference filter. Its compatibility with numerous OEM part numbers simplifies procurement and storage, while the price-beat guarantee ensures competitive savings.
Check your existing filter’s brand and part number against the cross-reference list: Epe, Fai Filtri, Fleetguard-ST, Hydac, Mahle, Oxfil, Parker Parfit, Sofrance, or Stauff. Also verify the dimensions: total height 158 mm, outer diameter 78 mm (largest 80 mm), and largest inner diameter 40.4 mm. It is built for Hydac equipment that uses cartridges with these measurements.
The filter media is inorganic microfibres with an absolute rating of 25 µm. This fine media traps hard particles that cause wear to pumps, cylinders, and valves, while maintaining the flow direction Out-In for effective contaminant capture.
Total height is 158 mm, outer diameter 78 mm (80 mm at the largest point), and largest inner diameter 40.4 mm. It installs via a tool-free spin-on or drop-in procedure, depending on your housing. Ensure the housing bore matches the inner and outer diameters for a leak-free seal.
It is built to mirror OEM specifications without the premium brand price. You receive equivalent filtration efficiency, dimensionally accurate fit, and reliable operation, all backed by our 30-day money-back guarantee and price-beat guarantee.
Depressurise the hydraulic system, remove the old filter, and clean the housing. Lubricate the new filter’s seal with clean oil, then install it by hand until the seal contacts, followed by a firm turn. Check for leaks after restarting. Always follow your equipment manual’s safety steps.
We offer worldwide shipping with tracking on every order. Your purchase is covered by a 30-day money-back guarantee and a price-beat guarantee, giving you confidence in both the product and your investment.
