No Products in the Cart
| Filtration Media | Inorganic Microfibers 5 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 5 µm |
| Flow direction | Out-In |
| Total Height | 400 mm (15 3/4") |
| Largest Inner Diameter | 70.5 mm (2 25/32") |
| Largest Outer Diameter | 170 mm (6 11/16") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Digoema | DGMH28314 |
| Fai Filtri | CF-RN-0630-A03-NA |
| Fleetguard-ST | ST1962 |
| Hydac | 0630RN003BN |
| Hydac | 0630RN003BN3HC |
| Hydac | 0630RN003BN4HC |
| Hydac | 0630RN003BNHC |
| Hydac | 319474 |
| Internormen | 012007003VG16PB |
| Internormen | 01NR6301VG10BP |
| Internormen | 01NR6303VG10BP |
| Internormen | 01NR6303VG16BP |
| Internormen | 315136 |
| Mahle | PI21063RNSMX3 |
| Oxfil | HF.8452 |
| Pall | HC0171FKP16H |
| Parker Parfit | GO2624 |
| Parker Parfit | PR4512 |
| Rexroth | R901025288 |
| Sofrance | C1032T0Y0A |
| Spare Part Mart | SPM-HYD-1468 |
| Stauff | NR630E03B |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1468.
Continuous Duty Production Lines
In 24/7 manufacturing settings, the 5 µm microfibre medium sustains high dirt-holding capacity over long service intervals, reducing filter change frequency and production downtime.
Mobile Hydraulics Exposed to Dust and Moisture
On earthmoving or agricultural equipment operating in dusty environments, the inorganic microfibres resist moisture and maintain efficiency, protecting hydraulic components from abrasive wear.
Preventative Maintenance Programs
Swapping to SPM-HYD-1468 at scheduled intervals helps maintain system cleanliness targets, extends component life, and simplifies inventory by consolidating multiple brand cross-references under one part number.
Legacy Equipment Support
For older Hydac-equipped machinery still in service, this direct-fit aftermarket replacement ensures continued filtration performance when OEM supply becomes scarce or expensive.
SPM-HYD-1468 is a direct physical replacement for hydraulic filters used in Hydac systems. Verify your existing filter’s outer diameter (170 mm), inner diameter (70.5 mm) and total height (400 mm) match these specifications. It also replaces filters from Digoema, Fai Filtri, Fleetguard-ST, Hydac, Internormen, Mahle, Oxfil, Pall, Parker Parfit, Rexroth, Sofrance and Stauff with the same dimensions.
The filter uses an inorganic microfibre medium rated at 5 µm absolute. This synthetic material delivers high particle capture efficiency and excellent dirt-holding ability, while resisting water and chemical degradation better than cellulose media.
SPM-HYD-1468 has a largest outer diameter of 170 mm, largest inner diameter of 70.5 mm and overall height of 400 mm. These measurements match the corresponding OEM housing requirements. Thread specifications are not published, but the filter is built to original equipment tolerances so it seats correctly in your housing.
It delivers the same 5 µm particle removal efficiency and media quality at a lower cost. You retain full system protection without paying a premium for the brand name. Our 30-day money-back guarantee lets you trial it with confidence.
Yes. Depressurise the hydraulic system, remove the old element, clean the housing, insert the SPM-HYD-1468 and reassemble. No special tools are required. Always replace O-rings or seals and follow your equipment’s maintenance procedures.
We provide worldwide shipping with tracking. Every order is covered by a 30-day money-back guarantee. If you find a lower price elsewhere, our price-beat guarantee ensures you get the best deal.
