No Products in the Cart
| Filtration Media | Wire Mesh 25 µm |
| Media type | Wire Mesh |
| Filtration Rating | 25 µm |
| Flow direction | Out-In |
| Total Height | 160 mm (6 5/16") |
| Largest Inner Diameter | 61 mm (2 13/32") |
| Smallest Inner Diameter | 48 mm (1 7/8") |
| Largest Outer Diameter | 100 mm (3 15/16") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Fai Filtri | CF-8-438-M25-NA |
| Fleetguard-ST | ST1725 |
| Mahle | 852438DRG25 |
| Oxfil | HF.7950 |
| Parker Parfit | GO3000 |
| Parker Parfit | PR3000 |
| Spare Part Mart | SPM-HYD-1538 |
| Stauff | RL035B25B |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1538.
High-Contaminant Environments
In dusty or dirty settings such as construction sites and agricultural operations, the 25 µm wire mesh captures sand, metal fines, and other abrasive particles. This prevents premature wear on hydraulic pumps and valves, extending component service life and reducing the risk of unexpected breakdowns.
Continuous-Duty Operations
For machinery that runs around the clock, this filter delivers consistent flow and dirt-holding capacity under sustained loads. Longer service intervals mean fewer change-outs, helping maintenance teams avoid unplanned stoppages and keep production on schedule.
Fleet Maintenance Standardisation
Workshops servicing diverse equipment can consolidate inventory by using the SPM-HYD-1538 to replace multiple branded filters. Cross-referencing with Fai Filtri, Fleetguard-ST, Mahle, Oxfil, Parker Parfit, and Stauff simplifys procurement and reduces the number of different part numbers kept in stock.
Preventive Maintenance Scheduling
Replacing the hydraulic filter at recommended intervals as part of a planned maintenance programme safeguards oil cleanliness. This proactive step helps maintain system efficiency, lowers the chance of contamination-related failures, and keeps warranty compliance on track.
The SPM-HYD-1538 is a direct replacement for filters from Fai Filtri, Fleetguard-ST, Mahle, Oxfil, Parker Parfit, and Stauff. Check your existing filter against these dimensions: total height 160 mm, largest outer diameter 100 mm, largest inner diameter 61 mm, smallest inner diameter 48 mm, and confirm the flow direction is out-in. If you need assistance, contact our support team with your current part number.
This hydraulic filter uses a wire mesh media with an absolute rating of 25 microns. It reliably removes solid contaminants down to 25 µm from the hydraulic fluid, which helps protect sensitive components like proportional valves and high-pressure pumps from abrasive damage.
The filter is a cartridge type without a threaded end. Exact dimensions are: total height 160 mm, largest outer diameter 100 mm, largest inner diameter 61 mm, and smallest inner diameter 48 mm. Always verify your housing’s measurement requirements to ensure a proper fit.
The SPM-HYD-1538 is built to match the OEM specifications of the filters it replaces. It offers the same 25 µm wire mesh efficiency and dimensional accuracy as elements from Fai Filtri, Fleetguard-ST, Mahle, Oxfil, Parker Parfit, and Stauff, but at a more competitive price point with no sacrifice in quality.
Installation follows standard hydraulic cartridge procedures. Relieve system pressure, remove the old filter, clean the housing, lubricate the new seal, and insert the SPM-HYD-1538. If there is a retaining nut or cover, tighten to the manufacturer’s torque specification. No special tools are required.
Spare Part Mart provides worldwide shipping with tracking on every order. You are protected by a 30-day money-back guarantee if the filter does not meet your expectations, and our price-beat promise ensures you get the best deal. If you find an equivalent filter at a lower price, we will beat it.
