No Products in the Cart
| Filtration Media | Inorganic Microfibers 12 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 12 µm |
| Flow direction | Out-In |
| Total Height | 209 mm (8 7/32") |
| Largest Inner Diameter | 43.4 mm (1 23/32") |
| Outer Diameter | 78 mm (3 1/16") |
| Largest Outer Diameter | 80 mm (3 5/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Aiag | HF3101F |
| Baldwin | H9075V |
| Baldwin | PT9075V |
| Behringer | VW9600812AV |
| Carquest | 84852 |
| Donaldson | P164365 |
| Donaldson | P561882 |
| Epe | 169600SH10SLE000V |
| Fai Filtri | CF-960-2-A10-NV |
| Filtersoft | H9608MDVL |
| Fleetguard | HF30211 |
| Fleetguard | HF30263 |
| Fleetguard | HF7470 |
| Fleetguard | HF8270 |
| Fluitek | P0310811U61 |
| Grove | 9437100757 |
| Hy-Pro | HP60L812MV |
| Hydac | 11108D12BNV |
| Hydac | 1263560 |
| Mahle | 891017SMX10FPM |
| Moog | B645752V |
| Nuovo Pignone | RCO369481301 |
| Oxfil | HF.8153 |
| Pall | HC9600FKS8Z |
| Parker Parfit | 926838Q |
| Parker Parfit | 931582 |
| Parker Parfit | 932655Q |
| PTI | H1030HFV |
| PTI | HF3030KFV |
| Purolator | 9313324 |
| Schroeder | SBF9600887V |
| Schroeder | SBF96008S7V |
| Schroeder | SBF96008Z10V |
| Spare Part Mart | SPM-HYD-1613 |
| ST Separat Tech | 2960L12V08 |
| ST Separat Tech | 3960GGHV08 |
| ST Separat Tech | 3960MGHV08 |
| ST Separat Tech | 8960L12V08 |
| Triboguard | 9600812UMV |
| Vickers | V6021V2C10 |
| Vickers | V6021V2V10 |
| Western Filters | E6020V2U10 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1613.
Continuous-Duty Hydraulic Systems
In production lines, injection moulding machines, or presses that run around the clock, the SPM-HYD-1613 maintains oil cleanliness over extended cycles. Its 12-micron rating catches wear particles before they circulate, reducing unplanned downtime and prolonging the life of pumps and valves.
High-Contamination Environments
For equipment operating in dusty or dirty conditions, such as construction or mining support machinery, this filter's inorganic microfibers media offers consistent fine filtration. It helps prevent ingressed contaminants from causing silting or erosion in tight-clearance hydraulic components.
Preventive Maintenance Programs
When swapping filters on a strict schedule, the SPM-HYD-1613 provides a cost-effective alternative to branded elements. It fits a wide range of housings using the cross-referenced part numbers, simplifying inventory management without compromising protection.
Hydraulic System Flushing
After a component failure or fluid change, excellent filtration is critical. Using this replacement filter during system flushing captures residual debris down to 12 µm, helping bring the hydraulic oil back to a clean state quickly and efficiently.
This filter is a direct replacement for elements used in Hydac hydraulic systems. It cross-references a range of industry part numbers from brands like Aiag, Baldwin, Donaldson, Hydac, Mahle, Pall, and others. If your machine requires one of these cross-referenced elements, the SPM-HYD-1613 will fit the housing and provide the correct filtration.
The filter uses inorganic microfibers media rated at 12 µm absolute. This media type is designed for high dirt-holding capacity and effective removal of fine particles from hydraulic oil, protecting sensitive system components.
The element has a total height of 209 mm, outer diameter of 78 mm, largest outer diameter of 80 mm, and largest inner diameter of 43.4 mm. The flow direction is out-in. Check these measurements against your existing housing to ensure a correct match.
No, the SPM-HYD-1613 is an aftermarket filter built to match OEM specifications. It is not a genuine branded part, but it is manufactured to offer equivalent fit and filtration performance at a more economical price. It carries Spare Part Mart’s 30-day money-back guarantee for peace of mind.
Installation follows standard practice for cartridge-style hydraulic filters. After ensuring the system is depressurised, remove the old element, lubricate the new seal with clean hydraulic oil, and slide it into the housing as per equipment guidelines. Replacement intervals depend on your machine’s maintenance schedule and operating conditions; always follow the original equipment manufacturer’s recommendations.
We offer worldwide shipping with tracking on all orders. Your purchase is protected by our 30-day money-back guarantee. If you find a lower advertised price elsewhere, let us know and we will beat it.
