No Products in the Cart
| Element Collapse pressure | 20 bar (290 PSI) |
| Filtration Media | Inorganic Microfibers 7 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 7 µm |
| Flow direction | Out-In |
| Total Height | 329 mm (12 15/16") |
| Largest Inner Diameter | 43.4 mm (1 23/32") |
| Outer Diameter | 78 mm (3 1/16") |
| Largest Outer Diameter | 80 mm (3 5/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Allison | 23049373 |
| Baldwin | BT317MPC |
| Baldwin | PT9078V |
| Digoema | DGMH96613V |
| Donaldson | P164602 |
| Donaldson | P166254 |
| Epe | 169600TH6SLE000V |
| Fai Filtri | CF-960-3-A06-NV |
| Ferromatik | 1639868190 |
| Fleetguard | HF30159 |
| Fleetguard | HF7473 |
| Fleetguard | HF8273 |
| Fluitek | P0311282U61 |
| General Motors | 23049373S |
| Hy-Pro | HP60L136MV |
| Hydac | 11113D06BNV |
| Hydac | 2063951 |
| Orenstein + Koppel (O&K) | 8476390 |
| Orenstein + Koppel (O&K) | 9476390 |
| Oxfil | HF.8159 |
| Pall | HC9600FKN13Z |
| PTI | H1050HFV |
| PTI | HF3050HFV |
| Schroeder | SBF96001383V |
| Schroeder | SBF960013Z5V |
| Spare Part Mart | SPM-HYD-1618 |
| ST Separat Tech | 3960GGEV13 |
| ST Separat Tech | 8960L06V13 |
| Triboguard | 9600136UMV |
| Vickers | V6021V4C05 |
| Vickers | V6021V4V05 |
| Volvo | 11991046 |
| Volvo | E29510910 |
| WIX | 57362 |
| Woodgate | WGPN9613Z |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1618.
High-Dust and Contaminated Environments
In construction, mining, or agricultural machinery where hydraulic oil is exposed to high levels of dust and moisture, this 7 µm microfibre media captures fine particles that accelerate wear. Using this filter extends pump and motor life, even under severe operating conditions.
Continuous-Duty Hydraulic Systems
Manufacturing plants and process lines rely on uninterrupted hydraulic power. The SPM-HYD-1618 maintains consistent oil cleanliness during 24/7 operation, preventing slit build-up that causes valve sticking and erratic performance. Its 20 bar collapse pressure ensures reliable filtration even as the element loads with contaminants.
Efficient Maintenance Planning
Predictable change intervals are easier to implement when filter performance is consistent. This element’s precise dimensions and robust construction mean it can be swapped quickly during scheduled shutdowns, reducing labour and system downtime. It is an economical option that supports a proactive maintenance strategy.
Multi-Brand Fleet Standardisation
For workshops servicing equipment from manufacturers such as Hydac, Donaldson, or Vickers, this single aftermarket element replaces multiple OEM part numbers. It simplifies inventory management and reduces shelf space, while still delivering the required filtration performance for each machine.
This filter is a direct replacement for elements used in Hydac hydraulic systems and other equipment. To verify fitment, compare the dimensions (329 mm height, 78 mm OD, 43.4 mm ID) against your existing element or consult your machine’s part manual. If your housing matches, the SPM-HYD-1618 will install correctly.
It uses inorganic microfibre media rated at 7 µm. This fine filtration level removes damaging particles common in hydraulic oil, protecting sensitive components like servo-valves and piston pumps from abrasive wear.
The SPM-HYD-1618 is a cylindrical element without threaded end connections; it seals with O-rings or gaskets inside the filter housing. The critical dimensions are 329 mm total height, 78 mm outer diameter, and a largest inner diameter of 43.4 mm. Always check that your housing accepts these measurements.
No, the SPM-HYD-1618 is an aftermarket filter manufactured by Spare Part Mart. It is built to match the performance and form factor of branded elements from companies like Hydac, Pall, and Donaldson, but it is not a genuine OEM part. It offers the same filtration quality at a significantly lower cost.
Installation follows standard hydraulic filter replacement procedures. Depressurise the system, remove the old element, check the housing for cleanliness, and insert the new SPM-HYD-1618. Replace any O-rings as needed. No special tools are required. Always follow your equipment’s maintenance guidelines to ensure a proper seal.
Spare Part Mart ships worldwide with tracking included. Each order is covered by a 30-day money-back guarantee. If you find a lower advertised price for an equivalent filter, we offer a price-beat guarantee. For delivery timeframes, please check the shipping estimate at checkout.
