No Products in the Cart
| Element Collapse pressure | 20 bar (290 PSI) |
| Filtration Media | Inorganic Microfibers 5 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 5 µm |
| Flow direction | Out-In |
| Total Height | 328 mm (12 29/32") |
| Largest Inner Diameter | 24.6 mm (31/32") |
| Outer Diameter | 50 mm (1 31/32") |
| Largest Outer Diameter | 51.7 mm (2 1/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Airfil | AFKOVL873 |
| Comex | P9800D13N2003 |
| Comex | P9800D13N3 |
| Donaldson | P169451 |
| Epe | 169800TH3SLE000P |
| Fai Filtri | CF-980-3-A03-NA |
| Fairey Arlon | R980H1303A |
| Finn Filter | FFKPVL171033ABS |
| Fleetguard | HF30522 |
| Hy-Pro | HP80L133MB |
| Hydac | 11313D03BN |
| Hydac | 1262441 |
| Hydac | 2061087 |
| Hydac | H980013003BN |
| Internormen | 0598003VG10EP13 |
| Mahle | 891026SM3 |
| Mahle | 891026SMX3 |
| Oxfil | HF.8243 |
| Pall | HC9800FKP13H |
| Parker Parfit | 933782Q |
| Parker Parfit | FC7103F003BS |
| Parker Parfit | FC7103Q002BS |
| PTI | P98050GGB |
| Schroeder | SBF980013S1B |
| Schroeder | SBF980013Z3B |
| Sofima (UFI) | EPB23NFA |
| Spare Part Mart | SPM-HYD-1643 |
| ST Separat Tech | 2980L03B13 |
| Stauff | SP035E03B |
| Swft Filters Inc | SF9800133UM |
| Zinga | S1303LN |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1643.
Heavy Contamination Environments
When hydraulic equipment runs in quarries, mines or dusty construction sites, airborne particles quickly contaminate fluid. The 5‑micron inorganic microfibre media traps fine abrasive solids before they damage pumps and valves, extending component service life and reducing unscheduled repairs.
Continuous‑Duty Manufacturing
Production lines that operate around the clock leave no room for filtration failures. This filter maintains consistent oil cleanliness hour after hour, preventing the slow accumulation of silt that leads to valve sticking, erratic cylinder movement or pump cavitation under sustained heat and load.
Fleet Maintenance Consolidation
Workshops managing mixed fleets of Hydac and other branded equipment benefit from a single filter solution. Because SPM‑HYD‑1643 cross‑references over 20 different part numbers from manufacturers like Hydac, Mahle and Pall, inventory complexity drops, shelf space shrinks and reordering becomes simpler.
Scheduled Service Intervals
During planned shutdowns, every dollar counts. Replacing with this aftermarket element cuts consumable spend while providing the same protection as the original filter, helping maintenance budgets stretch further across the year without compromising hydraulic system reliability.
This filter is a direct dimensional match for Hydac housings that accept a 328 mm tall, 50 mm outer diameter element with a 24.6 mm inner spud opening. It cross‑references over 20 different brand part numbers, so it suits a wide range of Hydac‑compatible assemblies. If your existing filter shares these dimensions and fits your machine, the SPM‑HYD‑1643 drops in seamlessly.
The filter uses inorganic microfibre media with an absolute rating of 5 micrometres. This material offers high dirt‑holding capacity and consistent particle removal in hydraulic oils, protecting pumps, valves and actuators from premature wear caused by fine contamination.
Total height is 328 mm, the largest outer diameter is 51.7 mm (main body 50 mm), and the inner spud opening is 24.6 mm. The filter follows an out‑in flow direction and seals via end caps inside the housing; it has no threaded connection.
SPM‑HYD‑1643 is a high‑quality aftermarket alternative, not a genuine Hydac product. It is manufactured to the same form, fit and filtration specification as the Hydac element it replaces, delivering equivalent performance and protection at a more competitive price. All our filters undergo rigorous quality checks.
Installation follows standard hydraulic filter replacement: de‑energise the system, relieve pressure, remove the housing cover and old element, clean the housing, then insert the SPM‑HYD‑1643 exactly as you would the original. Ensure all seals are intact and properly seated before retightening. Start the system and check for leaks at low pressure.
Every order includes worldwide shipping with full tracking. We offer a 30‑day money‑back guarantee on all filters, and our price‑beat guarantee ensures you never pay more than you should. If you find a lower delivered price for an identical aftermarket filter elsewhere, we will beat it.
