No Products in the Cart
| Filtration Media | Inorganic Microfibers 5 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 5 µm |
| Flow direction | Out-In |
| Total Height | 209 mm (8 7/32") |
| Largest Inner Diameter | 24 mm (15/16") |
| Largest Outer Diameter | 49.5 mm (1 15/16") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Baldwin | H8117 |
| Baldwin | H8119 |
| Baldwin | H8121 |
| Donaldson | P167414 |
| Epe | 169801SH3SLF000V |
| Fai Filtri | CF-981-2-A03-HV |
| Filtersoft | H9808MAVH |
| Fleetguard | HF30614 |
| Fleetguard | HF7510 |
| Fluitek | P01904405U63 |
| Fluitek | P01908005U63 |
| Hy-Pro | HP81L82MV |
| Mahle | 7835655 |
| Mahle | 891025SMVST3FPM |
| Mahle | 891025SMVST3VITON |
| Moog | A31254A |
| Moog | B645662V |
| Oxfil | HF.8266 |
| Pall | HC9801FDP8Z |
| Pall | HC9801FKP8Z |
| Schroeder | SBF98018S7V |
| Schroeder | SBF98018Z3V |
| Spare Part Mart | SPM-HYD-1656 |
| ST Separat Tech | 8980H02V08 |
| Triboguard | 980182UMV |
| Vickers | V6014V2H03 |
| Vickers | V6014V2V03 |
| Western Filters | E6011V2U03 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1656.
High Contamination Environments
In foundries, quarries or wood processing plants, airborne dust and swarf routinely enter hydraulic reservoirs. The 5-micron inorganic microfibers trap these particles before they score cylinder rods and spool valves, extending component life and cutting unplanned downtime.
Continuous Duty Cycles
Hydraulic power units that run around the clock demand a filter that won't choke mid-shift. The high dirt-holding capacity of the microfibers media keeps pressure drop low over extended service intervals, so machinery stays productive without premature bypass.
Inventory Consolidation
Because SPM-HYD-1656 cross-references over a dozen popular filter brands, a single stock-keeping unit replaces multiple part numbers on your shelf. This reduces purchasing complexity, frees up stores space, and ensures you always have the right filter on hand when a machine goes down.
High Viscosity Fluids
When cold-starting equipment or running heavyweight hydraulic oils, the out-in flow design provides a larger inlet surface area. This helps the filter maintain full flow without restriction, protecting sensitive components even as fluid viscosity changes with temperature.
SPM-HYD-1656 directly replaces hydraulic filters from Baldwin, Donaldson, Epe, Fai Filtri, Filtersoft, Fleetguard, Fluitek, Hy-Pro, Mahle, Moog, Oxfil, Pall, ST Separat Tech, Schroeder, Triboguard, Vickers and Western Filters. Verify the dimensions: total height 209 mm, largest outer diameter 49.5 mm, largest inner diameter 24 mm. Compare these with your current filter to confirm a match.
The filter element employs inorganic microfibers rated at 5 µm absolute. This media removes fine silt and wear particles that cause valve stiction and accelerate pump failure, keeping your hydraulic oil clean and serviceable longer.
No special adapters are required for standard housings. The filter uses an out-in flow direction typical of many hydraulic applications. Always check the internal thread size and sealing method of your housing against the filter's dimensions before installation.
No, SPM-HYD-1656 is an aftermarket filter built to match OEM specifications for fit and performance. It is not a genuine or OEM-branded part, but provides equivalent filtration at a lower cost, backed by our money-back guarantee.
Always follow the procedure in your equipment service manual. Depressurise the hydraulic circuit, remove the old element, and clean the housing. Fit the SPM-HYD-1656, ensuring it seats correctly, then replace the cover and tighten to the manufacturer's specified torque. Check for leaks on restart.
We offer a 30-day money-back guarantee and a price-beat guarantee on all orders. We ship worldwide with tracking, so you can order with confidence regardless of your location.
Orders typically require 1–3 business days for processing. During this time, we confirm product availability and prepare the shipment for consolidation.
We offer two shipping tiers designed to meet your operational needs. The exact costs for all shipping options will be displayed at checkout.
Express Shipping (UPS, DHL, etc.)
Ideal for urgent needs. Estimated delivery time is typically 3–5 business days after processing.
Economy Shipping
Our standard, cost-effective option. Estimated delivery time is typically 5–10 business days after processing.
Shipping costs are calculated at checkout based on your location and selected shipping method.
Once your order ships, you'll receive a tracking number via email so you can monitor your delivery.
For detailed delivery information and FAQs, please visit our Delivery Information page or contact us.

