No Products in the Cart
| Filtration Media | Inorganic Microfibers 7 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 7 µm |
| Total Height | 153 mm (6 1/32") |
| Largest Inner Diameter | 22.1 mm (7/8") |
| Largest Outer Diameter | 47 mm (1 27/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Airfil | AFKOVL2675 |
| Behringer | BE110P06A |
| Donaldson | 48251 |
| Donaldson | P170602 |
| Donaldson | P566659 |
| Epe | 9110LAH10SLA000P |
| Epe | 9110LAH10XLA000M |
| Epe | E400HL110H6 |
| Epe | E400HL110H6LLLA |
| Fai Filtri | D-0110-A06-NHA |
| Faun-Frisch | 99707308859 |
| Finn Filter | FC7202F005BK |
| Finn Filter | FC7202F005BS |
| Finn Filter | FC7202Q005BS |
| Finn Filter | FFKPVL172025ABS |
| Fleetguard | HF30042 |
| Fleetguard | HF6865 |
| Fleetguard-ST | ST1224 |
| Hydac | 0110D005BN |
| Hydac | 0110D005BN3HC |
| Hydac | 0110D005BN4HC |
| Hydac | 1260892 |
| Hydac | 2055907 |
| Hydac | 304085 |
| Hydac | 308110 |
| Internormen | 020110D6VG30HCEP |
| Internormen | 303530 |
| Mahle | 7889330 |
| Mahle | 890003SMX6 |
| Mahle | 890020SMX6 |
| Mann-Filter / Mann & Hummel | HD5124 |
| Oxfil | HF.8673 |
| Parker Parfit | FC7202Q05BS |
| Parker Parfit | GO3082 |
| Parker Parfit | GO3086 |
| Parker Parfit | PR3086 |
| Schroeder | SBF0110DS7B |
| Schroeder | SBF0110DZ10B |
| Schroeder | SBF0110DZ5B |
| Spare Part Mart | SPM-HYD-1679 |
| ST Separat Tech | H110D05N |
| Stauff | SE030E05B |
| Stauff | SE030G05B |
| Triboguard | 110D005N |
| Vickers | V0112B2C05 |
| Vickers | V0112B2V05 |
| Woodgate | WGHH11005DB |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1679.
Dust-Laden Job Sites
When operating Hydac hydraulic systems in dusty environments, the 7-micron inorganic microfibres media captures fine abrasive particles that would otherwise score cylinders and valves. This reduces wear and helps avoid unplanned downtime.
Around-the-Clock Production
For continuous-duty applications, the high dirt-holding capacity of this filter element extends replacement intervals. Consistent oil cleanliness is maintained, keeping pumps and actuators running without performance degradation.
Fleet Maintenance Simplification
With a single cross-reference covering multiple brand codes, you can stock SPM-HYD-1679 for different machines that require the same form factor. This consolidates inventory and cuts procurement complexity.
Post-Repair Protection
After servicing a hydraulic system, installing a fresh filter with guaranteed 7-micron efficiency prevents residual contamination from damaging newly rebuilt components. This is a low-cost safeguard for your repair investment.
SPM-HYD-1679 is a direct physical match for many Hydac hydraulic systems. It has height 153 mm, outer diameter 47 mm, and inner diameter 22.1 mm. Check your existing filter dimensions against these to confirm fitment.
The element uses inorganic microfibres rated at 7 microns absolute, providing efficient removal of fine contaminants. This media is designed for high dirt-holding capacity and consistent oil flow.
Beyond dimensions, this filter has no thread; it is a drop-in cartridge type. Verify seal type and bypass valve specifications from your equipment manual. The dimensions provided are 153 mm height, 47 mm OD, 22.1 mm ID.
SPM-HYD-1679 is manufactured to match OEM design and specifications. It is not a genuine Hydac product, but a high-quality aftermarket alternative. It carries a 30-day money-back guarantee for peace of mind.
Replacement is straightforward on most Hydac filter housings. Isolate the hydraulic system, remove the housing cover, replace the old element, and refit. Always clean the housing and lubricate seals. No special tools are needed for this cartridge type.
We ship worldwide with tracking on all orders. Every purchase is covered by our 30-day money-back guarantee and a price-beat guarantee. Your filter arrives in secure packaging to prevent damage.
Orders typically require 1–3 business days for processing. During this time, we confirm product availability and prepare the shipment for consolidation.
We offer two shipping tiers designed to meet your operational needs. The exact costs for all shipping options will be displayed at checkout.
Express Shipping (UPS, DHL, etc.)
Ideal for urgent needs. Estimated delivery time is typically 3–5 business days after processing.
Economy Shipping
Our standard, cost-effective option. Estimated delivery time is typically 5–10 business days after processing.
Shipping costs are calculated at checkout based on your location and selected shipping method.
Once your order ships, you'll receive a tracking number via email so you can monitor your delivery.
For detailed delivery information and FAQs, please visit our Delivery Information page or contact us.

