No Products in the Cart
| Filtration Media | Inorganic Microfibers 7 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 7 µm |
| Flow direction | Out-In |
| Total Height | 153 mm (6 1/32") |
| Largest Inner Diameter | 22.1 mm (7/8") |
| Largest Outer Diameter | 47 mm (1 27/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Fai Filtri | D-0110-A06-NHV |
| Hy-Pro | HP06DNL76MV |
| Hydac | 2070591 |
| Oxfil | HF.8674 |
| Spare Part Mart | SPM-HYD-1684 |
| Triboguard | 110D005NV |
| Vickers | V0112V2C05 |
| Vickers | V0112V2V05 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1684.
Fine Particle Control in Sensitive Systems
Hydraulic systems with servo valves or proportional controls demand very clean oil. The 7 µm inorganic microfibre media removes silt-sized particles that erode tight clearances, preserving response time and accuracy. Swapping to this filter at every service interval helps you avoid unplanned downtime from sticky valves.
High-Dirt-Ingress Environments
Construction, mining, or quarry machinery can breathe in airborne dust through breathers or cylinder rod seals. Installing the SPM-HYD-1684 upgrades your defence against rapid contamination spikes. Its Out-In flow design loads the media effectively, extending element life before a change-out is needed.
Fleet Inventory Simplification
When you run multiple Hydac-compatible machines, holding one aftermarket part number that crosses to several branded filters cuts inventory complexity. The SPM-HYD-1684 covers installations where Fai Filtri, Hy-Pro, Oxfil, Triboguard, or Vickers elements would otherwise be ordered separately, reducing stores overhead.
Scheduled Maintenance Optimisation
Rather than stretching filter changes to the limit, a cost-effective aftermarket element allows more frequent replacements without straining the consumables budget. Keeping filter pressure drop low with a clean SPM-HYD-1684 helps maintain full system flow and prevents bypass valve opening during cold starts.
It is engineered as a direct replacement for Hydac elements that match its critical dimensions: total height 153 mm, largest outer diameter 47 mm, and largest inner diameter 22.1 mm. Always verify these measurements against your current filter before ordering, as housings can vary by series even within the same brand.
The media captures 7-micrometre and larger particles, which are roughly the size of fine silt or red blood cells. Inorganic microfibres offer a high contaminant-holding capacity and stable pore structure, so you get consistent fine filtration that protects pumps and servo components from abrasive wear.
The SPM-HYD-1684 is a replacement element, not a spin-on can. It drops into the existing housing bore and seals via its end caps and outer O-rings or gaskets that come with the element. The listed diameters relate to the sealing surfaces; ensure your housing matches the 22.1 mm inner and 47 mm outer dimensions.
It is produced to match the OEM specifications for fit, flow direction (Out-In), and filtration efficiency. While not carrying the OEM label, it provides equivalent contaminant control at a lower price. Cross-references to Fai Filtri, Hy-Pro, Hydac, Oxfil, Triboguard, and Vickers confirm its design intent for those systems.
Replacing a hydraulic filter element is routine maintenance. Depressurise the system, remove the filter housing cover, swap the old element for the SPM-HYD-1684, and check that end seals are correctly seated. Refill the housing with clean oil if needed, then check for leaks after restarting.
Spare Part Mart offers worldwide shipping with tracking on all orders. Your purchase is backed by a 30-day money-back guarantee and a price-beat guarantee, so you can buy with confidence knowing you are getting a dependable aftermarket filter delivered to your door.
Orders typically require 1–3 business days for processing. During this time, we confirm product availability and prepare the shipment for consolidation.
We offer two shipping tiers designed to meet your operational needs. The exact costs for all shipping options will be displayed at checkout.
Express Shipping (UPS, DHL, etc.)
Ideal for urgent needs. Estimated delivery time is typically 3–5 business days after processing.
Economy Shipping
Our standard, cost-effective option. Estimated delivery time is typically 5–10 business days after processing.
Shipping costs are calculated at checkout based on your location and selected shipping method.
Once your order ships, you'll receive a tracking number via email so you can monitor your delivery.
For detailed delivery information and FAQs, please visit our Delivery Information page or contact us.

