No Products in the Cart
| Filtration Media | Wire Mesh 90 µm |
| Media type | Wire Mesh |
| Filtration Rating | 90 µm |
| Flow direction | Out-In |
| Total Height | 130 mm (5 1/8") |
| Largest Inner Diameter | 35 mm (1 3/8") |
| Largest Outer Diameter | 70 mm (2 3/4") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Atos | SPCFE100125 |
| Bendini | 128101 |
| Donaldson | C100 |
| Donaldson | P171657 |
| Fai Filtri | MU-100-M90 |
| Omt | CFI100E |
| Omt | CFI100R125 |
| Omt | CFI100R90 |
| Omt | CFI100U |
| Oxfil | HF.8980 |
| Sofima (UFI) | CRH025MN1 |
| Sofima (UFI) | EM25MCV1 |
| Sofima (UFI) | EM25MN1 |
| Sofima (UFI) | ERD31NMF |
| Sofima (UFI) | RH25MCV1 |
| Spare Part Mart | SPM-HYD-1752 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1752.
Managing High Particulate Loads
In environments where hydraulic oil carries abrasive debris, the 90-micron wire mesh media provides robust defence against large contaminants. Its sturdy construction withstands particle loading without collapsing, maintaining flow integrity and extending the service life of pumps and valves.
Simplifying Fleet Maintenance
If you operate mixed-brand machinery, consolidating filter stock with a single cross-reference part reduces storage complexity. SPM-HYD-1752 replaces several brand-specific elements, streamlining inventory and minimising the risk of using an incorrect filter.
Sustaining Continuous Hydraulic Operation
For systems that run around the clock, consistent fluid cleanliness is critical. The out-in flow path and durable wire mesh ensure reliable contamination control, helping to prevent unscheduled downtime caused by clogged or bypassing filters.
Cost-Sensitive Refurbishment Projects
When overhauling older hydraulic equipment, keeping rebuild costs down is essential. This aftermarket filter offers the same fit and function as the original part at a significantly lower price, making it a practical choice for workshop budgets.
Check the cross-reference list for your current filter part number. If it matches any of the brands Atos, Bendini, Donaldson, Fai Filtri, Omt, Oxfil, or Sofima (UFI), SPM-HYD-1752 is a direct drop-in replacement. Verify your housing dimensions match: total height 130 mm, largest inner diameter 35 mm, and largest outer diameter 70 mm.
This element uses a wire mesh media with a rating of 90 microns. It is designed to capture larger contaminants in hydraulic fluid while allowing consistent flow rates and resisting collapse under differential pressure.
The filter measures 130 mm in total height, 35 mm at the largest inner diameter, and 70 mm at the largest outer diameter. It is designed with an out-in flow direction, so ensure your housing aligns correctly. No additional adapters are needed if your existing filter matches these measurements.
SPM-HYD-1752 is built to match OEM specifications for the cross-referenced brands. It provides equivalent filtration performance at a lower cost, backed by our 30-day money-back guarantee and price-beat promise.
Relieve system pressure and follow your equipment service manual. Remove the used filter element, clean the housing thoroughly, and insert SPM-HYD-1752, verifying the out-in flow direction matches your system. Replace any seals or O-rings as recommended. No special tools are required.
We offer worldwide shipping with tracking on every order. Your purchase is covered by a 30-day money-back guarantee. If you find a lower price elsewhere, our price-beat guarantee ensures you get the best value.
