No Products in the Cart
| Filtration Media | Inorganic Microfibers 12 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 12 µm |
| Flow direction | In-Out |
| Total Height | 149 mm (5 7/8") |
| Largest Inner Diameter | 45 mm (1 25/32") |
| Smallest Inner Diameter | 8.3 mm (5/16") |
| Outer Diameter | 72 mm (2 27/32") |
| Largest Outer Diameter | 72.5 mm (2 27/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Airfil | AFPOVL2810 |
| Atlas (Terex) | 2662026 |
| Atlas (Terex) | 4653905 |
| Baldwin | PT8986MPG |
| Digoema | DGMH3CC10 |
| Donaldson | CRS9002 |
| Donaldson | P171823 |
| Fai Filtri | R-100-2-A10-A |
| Fairey Arlon | TXW310 |
| Fairey Arlon | TXW310B |
| Fairey Arlon | TXW3CC10 |
| Fairey Arlon | TXW3GDL10 |
| Finn Filter | FFPAV1102810 |
| Hydreco | ET25B1 |
| Ikron | HEK0820150ASFG010B |
| Ikron | HHC01660 |
| Oxfil | HF.9254 |
| Parker Parfit | 937786Q |
| Parker Parfit | PR4390 |
| Sofima (UFI) | CRC120FD1 |
| Sofima (UFI) | ERF12NFC |
| Sotras | SH8042 |
| Sotras | SH8058 |
| Spare Part Mart | SPM-HYD-1800 |
| Vickers | FT1002A10A |
| Volvo | 11992772 |
| Woodgate | WGFW1CC10 |
| Woodgate | WGTW3CC10 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1800.
Dusty Operating Environments
Construction and quarry sites expose hydraulic systems to airborne particulates. The 12 µm microfiber media captures fine dust before it can score components, reducing wear on pumps and cylinders even when conditions are less than ideal.
Continuous Duty Cycles
For hydraulic systems that run extended shifts, heat and sustained flow place heavy demands on filtration. This element handles high dirt-loading capacity, keeping oil clean longer and helping to prevent unscheduled downtime caused by contamination.
Inventory Consolidation
Because SPM-HYD-1800 cross-references filters from over a dozen major brands, it can replace multiple part numbers on the shelf. This simplifies stock management for workshops servicing mixed fleets, reducing the need to carry several different filter types.
Scheduled Maintenance Intervals
Exchanging hydraulic filters at planned service intervals is critical. Installing SPM-HYD-1800 ensures consistent filtration performance without the cost of branded alternatives, allowing you to maintain strict schedules while controlling operational expenses.
SPM-HYD-1800 is a direct replacement for filters used in Atlas (Terex) equipment. It also cross-references numerous brands such as Donaldson, Parker and Vickers. Always verify the dimensions against your existing filter: Outer Diameter 72 mm, Total Height 149 mm, and inner diameters of 45 mm and 8.3 mm.
It provides 12 µm absolute filtration using inorganic microfibre media. This rating ensures effective removal of particles that can damage close-tolerance hydraulic components, helping to maintain system reliability and oil cleanliness.
The filter has a total height of 149 mm, an outer diameter of 72 mm (largest 72.5 mm), and a stepped inner diameter with a largest bore of 45 mm and a smallest of 8.3 mm. It follows an in-to-out flow direction, so verify your housing accepts these measurements.
No, it is not an OEM-branded part. SPM-HYD-1800 is a quality aftermarket replacement built to match OEM specifications. It offers the same filtration performance at a more affordable price, backed by our 30-day money-back guarantee.
Installation is straightforward. Depressurise the hydraulic system, remove the old filter (usually located in the return line), clean the sealing surface, lubricate the new filter’s seal with clean hydraulic oil, and tighten by hand. Start the system and check for leaks.
We provide worldwide shipping with tracking on all orders. Every Spare Part Mart filter comes with a 30-day money-back guarantee and our price-beat guarantee, so you can order with confidence knowing you are getting the best deal.
Orders typically require 1–3 business days for processing. During this time, we confirm product availability and prepare the shipment for consolidation.
We offer two shipping tiers designed to meet your operational needs. The exact costs for all shipping options will be displayed at checkout.
Express Shipping (UPS, DHL, etc.)
Ideal for urgent needs. Estimated delivery time is typically 3–5 business days after processing.
Economy Shipping
Our standard, cost-effective option. Estimated delivery time is typically 5–10 business days after processing.
Shipping costs are calculated at checkout based on your location and selected shipping method.
Once your order ships, you'll receive a tracking number via email so you can monitor your delivery.
For detailed delivery information and FAQs, please visit our Delivery Information page or contact us.

