No Products in the Cart
| Filtration Media | Wire Mesh 90 µm |
| Media type | Wire Mesh |
| Filtration Rating | 90 µm |
| Flow direction | In-Out |
| Total Height | 200 mm (7 7/8") |
| Largest Inner Diameter | 45 mm (1 25/32") |
| Smallest Inner Diameter | 8.3 mm (5/16") |
| Outer Diameter | 72 mm (2 27/32") |
| Largest Outer Diameter | 72.5 mm (2 27/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Baldwin | PT9280 |
| Domange | FD26L90 |
| Domange | FD26M90 |
| Donaldson | CRS120 |
| Fai Filtri | R-100-3-M90-A |
| Fairey Arlon | ST3D100 |
| Fairey Arlon | ST3D100B |
| Oxfil | HF.9269 |
| Parker Parfit | 944396 |
| Spare Part Mart | SPM-HYD-1815 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1815.
High-Flow Return Line Filtration
In systems with large return flow volumes, the 90-micron wire mesh media offers minimal restriction while capturing harmful particles. This keeps back-pressure low, protecting pumps and seals without robbing hydraulic power.
Servicing in Dusty Environments
Mobile plant and construction equipment often operate where airborne contamination is high. The robust wire mesh element handles heavy ingression without collapsing, and can be cleaned and reused after inspection, extending service intervals in these harsh conditions.
Fleet Maintenance Consolidation
Workshops maintaining mixed-brand equipment can use SPM-HYD-1815 to replace multiple OEM part numbers from Baldwin, Donaldson, and others. Reducing inventory to one reliable filter saves shelf space and simplifies re-ordering.
Suction Strainer for Bulk Headers
When fitted on the suction side of large gear pumps or hydraulic power packs, the wire mesh structure provides burst strength to resist pump cavitation. It stops larger debris from reaching the pump while allowing full oil flow, preventing starved inlets.
SPM-HYD-1815 cross-references directly to elements from Baldwin, Donaldson, Parker Parfit, Fairey Arlon, Fai Filtri, Oxfil, and Domange. Check your existing part number against this list; if it matches, the dimensions and connections will align. Physical measurements are 200 mm height, 72 mm outer diameter, 45 mm largest inner diameter, and 8.3 mm smallest inner diameter, with in-to-out flow.
The media is a single-layer wire mesh rated at 90 microns absolute. It captures particles down to 90 µm while allowing high flow with very low resistance, making it suitable for protecting pumps, valves, and cylinders from larger debris without generating excessive pressure drop.
This element relies on its inner diameters and outer body to locate in the housing, not a threaded centre post. The critical dimensions are a 45 mm ID at the large end and 8.3 mm ID at the small end, plus a 72-72.5 mm OD. Always compare with your original housing, and note the flow direction marked on the canister.
No, SPM-HYD-1815 is an aftermarket replacement produced to match the form, fit, and function of the original. It is not manufactured by or affiliated with the brands it replaces. You receive a high-quality alternative, not a genuine part, at a competitive price.
Relieve system pressure, remove the old element, and clean the housing. Inspect the sealing faces, then insert the new filter ensuring the flow arrow points in the correct direction (in-to-out). Replace housing seals if supplied, tighten the housing to the manufacturer’s torque, and bleed air from the system before restarting.
We ship worldwide with tracking. Every order is covered by a 30-day money-back guarantee and our price-beat promise. If you find a lower advertised price for the same aftermarket filter, we will beat it.
