No Products in the Cart
| Filtration Media | Impregnated Paper 10 µm |
| Media type | Impregnated Paper |
| Filtration Rating | 10 µm |
| Flow direction | In-Out |
| Total Height | 140 mm (5 1/2") |
| Largest Inner Diameter | 72 mm (2 27/32") |
| Smallest Inner Diameter | 10.3 mm (13/32") |
| Largest Outer Diameter | 106 mm (4 3/16") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Baldwin | PT9257 |
| Digoema | DGMH1BCC10 |
| Digoema | DGMH3B10 |
| Fai Filtri | R-250-1-P10-A |
| Fairey Arlon | TX3B10 |
| Fairey Arlon | TXX3B10 |
| Finn Filter | FC1090N010BS |
| Finn Filter | FFPA1109010 |
| Fleetguard | HF35112 |
| Fleetguard-ST | ST1743 |
| Fleetguard-ST | ST6180 |
| Omt | HR2501AN |
| Omt | HR2503AN |
| Orenstein + Koppel (O&K) | 4134453 |
| Oxfil | HF.9325 |
| Parker Parfit | PR4392 |
| Parker Parfit | TXX3B10B |
| Pingon | 05090215 |
| Sotras | SH8096 |
| Spare Part Mart | SPM-HYD-1832 |
| Woodgate | WGTX3B10 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1832.
High-Contamination Environments
When hydraulic machinery operates in dusty or dirty conditions, contaminant ingress is a constant risk. The 10-micron impregnated paper media captures fine particles that would otherwise wear pumps and valves, preserving system performance and extending component life.
Continuous-Duty Operations
For hydraulic power units running around the clock, consistent filtration is critical. This element’s robust media provides reliable particle retention and a high dirt-holding capacity, allowing longer service intervals without compromising oil cleanliness.
Fleet Maintenance Simplification
With cross-references spanning multiple global filter brands, the SPM-HYD-1832 allows maintenance teams to stock a single part number across diverse equipment. This reduces inventory complexity and ensures the right filter is always on hand.
Legacy Equipment Support
Older hydraulic systems often have discontinued OEM filters. This aftermarket replacement offers a readily available solution that matches original dimensions and performance, keeping trusted machinery operational and avoiding costly system modifications.
This SPM-HYD-1832 replaces a wide range of cross-referenced part numbers from brands such as Baldwin, Fleetguard, Parker Parfit and others. Verify fitment by comparing your current filter’s part number against our listed cross-references and checking the dimensions below against your housing.
The element uses impregnated paper media with a 10-micron absolute rating. This media is suited to general hydraulic fluid conditioning and effectively removes silt-sized particles that cause long-term component wear.
Total height is 140 mm, largest outer diameter 106 mm, largest inner diameter 72 mm, and smallest inner diameter 10.3 mm. The filter does not have threaded connections; it is a drop-in element that relies on these diameters for proper seating. Always measure your housing to ensure fit.
This is an aftermarket part, not a genuine OEM filter. It is manufactured to match the fit and filtration performance of the cross-referenced brands. You receive equivalent protection for your hydraulic system at a lower cost.
Installation follows standard hydraulic filter practices. Depressurise the system, remove the old element, clean the housing thoroughly, insert the new element with the flow arrow pointing in-to-out, and reassemble. Consult your equipment manual for specific torque values and bleed procedures.
We dispatch orders worldwide with tracking. Every filter comes with a 30-day money-back guarantee, and our price-beat guarantee ensures you get the best value on comparable products.
