No Products in the Cart
| Filtration Media | Wire Mesh 90 µm |
| Media type | Wire Mesh |
| Filtration Rating | 90 µm |
| Flow direction | Out-In |
| Total Height | 229 mm (9 1/32") |
| Thread | GAS 1.1/2 inch Female |
| Type | GAS |
| Thread Size | 1.1/2 inch |
| Orientation | Female |
| Largest Inner Diameter | 68 mm (2 11/16") |
| Largest Outer Diameter | 99 mm (3 29/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Atos | FEI250125 |
| Atos | XFUI250 |
| Bell Equipment | 203560 |
| Dieci | BHC0107 |
| Donaldson | FIOA180 |
| Donaldson | P172452 |
| Eurocomach | B317100032 |
| Fai Filtri | SE-150-M90-SG |
| Ikron | HF41030195ASMI125GHA01 |
| Ikron | HF41030195ASMS090GHA01 |
| Imer | 014710010000 |
| Imer | 03840406 |
| Messersi | 3840406 |
| Oxfil | HF.9595 |
| Sofima (UFI) | ESA32B12WMF |
| Sofima (UFI) | FAM40MNB70 |
| Spare Part Mart | SPM-HYD-1908 |
| Uniflux | XH352 |
| Zinga | SS150G00 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1908.
High-Debris Construction Sites
In dusty earthmoving environments, the 90-micron wire mesh traps sand and metal fines, preventing pump and valve wear. The filter's sturdy design withstands vibration and pressure spikes common on active job sites, keeping your Dieci telehandler or Imer mixer operating reliably.
Continuous-Cycle Material Handling
For machines running back-to-back shifts, uninterrupted uptime matters. This filter’s efficient flow path and consistent filtration reduce the risk of clogging, extending service intervals and minimising unscheduled downtime on loaders, dumpers, or other hydraulic equipment.
Fleet Maintenance Planning
When servicing multiple machines across brands, the SPM-HYD-1908 replaces filters from Atos, Donaldson, and Sofima, allowing you to stock one part for several machines. This simplifies inventory and reduces procurement complexity.
Cost-Sensitive Operations
For operations where every dollar counts, this aftermarket filter delivers OEM-comparable performance at a fraction of the cost. Enjoy the same reliability and protection as branded filters, freeing up budget for other critical maintenance.
Confirm your current filter has a GAS 1 1/2 inch female thread and overall height of 229 mm. It is designed for equipment from Dieci and Imer, and also cross-references to filters from Atos, Donaldson, UFI and others. If your original part number matches any in the cross-reference list, it will fit.
The SPM-HYD-1908 uses wire mesh media with a 90-micron absolute rating. This coarse meshing is ideal for hydraulic systems where high flow and low pressure drop are priorities, and where fine silt is not the primary contaminant. The wire mesh can be cleaned and reused in some applications.
It features a female GAS 1 1/2 inch thread. Total height is 229 mm, largest outer diameter 99 mm, and inner diameter at the seal is 68 mm. Always measure your housing to ensure clearance and thread compatibility before ordering.
This is an aftermarket filter built to the same form, fit, and function as the original. It is not a genuine OEM part but is manufactured to reliable standards. You receive a cost-effective replacement that performs comparably, supported by a 30-day money-back guarantee.
Before removal, depressurise the hydraulic system and clean the housing to avoid contamination. Unscrew the old filter, lubricate the new filter’s O-ring with clean hydraulic oil, and spin it on by hand until snug. Do not overtighten. Follow your machine manufacturer’s torque specification.
We offer worldwide shipping with tracking on all orders. Your purchase is protected by a 30-day money-back guarantee and our price-beat guarantee. We dispatch promptly once payment is cleared.
