No Products in the Cart
| Filtration Media | Wire Mesh 90 µm |
| Media type | Wire Mesh |
| Filtration Rating | 90 µm |
| Flow direction | Out-In |
| Total Height | 229 mm (9 1/32") |
| Thread | GAS 1.1/4 inch Female |
| Type | GAS |
| Thread Size | 1.1/4 inch |
| Orientation | Female |
| Largest Inner Diameter | 70 mm (2 3/4") |
| Largest Outer Diameter | 99 mm (3 29/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Fai Filtri | SE-120-M90-SG |
| Ikron | HF41030195ASMI125GGA01 |
| Ikron | HF41030195ASMS090GGA01 |
| Oxfil | HF.9589 |
| Sofima (UFI) | 665043 |
| Sofima (UFI) | 665044 |
| Sofima (UFI) | ESA32B10WMF |
| Sofima (UFI) | FAM30MNB60 |
| Spare Part Mart | SPM-HYD-1910 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1910.
Dusty Industrial Environments
In factories or workshops where airborne particles are prevalent, the 90-micron wire mesh captures dirt and debris before it can damage hydraulic components. This protection helps reduce wear on pumps and valves, keeping production machinery running reliably with less unplanned downtime.
Mobile Equipment Fleets
For operators managing multiple machines such as loaders or agricultural tractors, standardising on this filter simplifies parts inventory. The consistent specification across units reduces procurement complexity and ensures that every machine in the fleet benefits from the same level of contamination control.
Scheduled Maintenance Programmes
Including the SPM-HYD-1910 in routine service plans makes change-outs predictable. The known 90-micron rating allows maintenance teams to replace filters based on operating hours or oil analysis results, preventing unscheduled stops and extending the life of hydraulic oil and system components.
Varying Duty Cycles
Hydraulic systems that alternate between idle and peak loads experience pressure and temperature swings. The robust wire mesh construction of this filter withstands such fluctuations without media collapse, providing consistent filtration performance and protecting critical parts from cyclic stress.
Compare the filter's key dimensions and thread specification to your existing element. The SPM-HYD-1910 has a total height of 229 mm, a largest outer diameter of 99 mm, and a GAS 1.1/4 inch female thread. If these match your housing, the filter is compatible. Always verify the flow direction and sealing requirements before installation.
The filter media is a stainless steel wire mesh with an absolute rating of 90 microns (0.09 mm). This means it traps solid particles larger than 90 microns, preventing them from circulating in the hydraulic oil. Such contamination control helps protect pumps, cylinders, and valves from abrasive wear and potential failure.
It uses a GAS (BSPP) 1.1/4 inch female thread. GAS threads are a parallel standard common in hydraulic filtration, requiring a matching male thread on the filter head or housing. Ensure a clean and undamaged thread on both parts for a proper seal and to prevent leaks.
No, it is an aftermarket replacement manufactured to match the specifications of Fai Filtri, Ikron, Oxfil, and Sofima (UFI) branded filters. It is not a genuine OEM component but is built to the same dimensional and performance criteria, offering a cost-effective alternative for your hydraulic maintenance.
Replacement follows standard procedures: depressurise the hydraulic system, unscrew the used element, and clean the sealing surface. Lubricate the new filter's gasket with clean hydraulic oil, then spin it on and tighten by hand until snug. No special tools are needed. Always dispose of the old filter according to local regulations.
Spare Part Mart provides a 30-day money-back guarantee and a price-beat guarantee on all orders. We offer worldwide shipping with tracking, so you can monitor your delivery every step of the way.
Orders typically require 1–3 business days for processing. During this time, we confirm product availability and prepare the shipment for consolidation.
We offer two shipping tiers designed to meet your operational needs. The exact costs for all shipping options will be displayed at checkout.
Express Shipping (UPS, DHL, etc.)
Ideal for urgent needs. Estimated delivery time is typically 3–5 business days after processing.
Economy Shipping
Our standard, cost-effective option. Estimated delivery time is typically 5–10 business days after processing.
Shipping costs are calculated at checkout based on your location and selected shipping method.
Once your order ships, you'll receive a tracking number via email so you can monitor your delivery.
For detailed delivery information and FAQs, please visit our Delivery Information page or contact us.

