No Products in the Cart
| Burst Pressure | 21 bar (305 PSI) |
| Element Collapse pressure | 10 bar (145 PSI) |
| Filtration Media | Inorganic Microfibers 25 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 25 µm |
| Total Height | 209 mm (8 7/32") |
| Thread | GAS 3/4 inch Female Bottom |
| Type | GAS |
| Thread Size | 3/4 inch |
| Orientation | Female |
| Position | Bottom |
| Bypass Valve Opening Pressure | 1.75 bar (25 PSI) |
| Working Pressure | 12 bar (174 PSI) |
| Outer Diameter | 96 mm (3 25/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Donaldson | CAR8003 |
| Donaldson | P171629 |
| Duplomatic | FRCE034F25L |
| Fai Filtri | CTT-070-0-3-A25-A |
| Filtrec | A211G25BM |
| Omt | CSM06HNR |
| Oxfil | OF.8828 |
| Sofima (UFI) | CA152EFV1M |
| Sofima (UFI) | CCA152EFV1M |
| Sofima (UFI) | CCA152FV1BM |
| Sofima (UFI) | ERC12NFD |
| Spare Part Mart | SPM-OIL-1383 |
| Stauff | SFCT3625AE |
| UFI | ERC12NFD |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-OIL-1383.
High contamination environments
In dusty or dirty operating conditions, the 25 µm inorganic microfibre media traps fine debris before it can score bearings or valve surfaces. This extends the service life of critical components and reduces unplanned downtime.
Cold weather operation
During low temperature starts, thick oil can trigger the built in bypass valve at 1.75 bar, allowing immediate flow to vital parts. The filter element avoids collapse under differential pressure, protecting the system until normal temperatures are reached.
Fleet maintenance simplification
With cross compatibility across multiple filter brands, this single SPM part number consolidates inventory for workshops servicing varied equipment. It cuts stock holding costs and saves time during routine oil changes.
Continuous duty cycles
Rated for a working pressure of 12 bar and a burst pressure of 21 bar, the filter withstands prolonged high stress operation. This makes it suitable for hydraulic systems that run around the clock without excessive fatigue risk.
This SPM oil filter is a direct physical match for elements from Donaldson, Duplomatic, Fai Filtri, Filtrec, Omt, Oxfil, Sofima (UFI), Stauff and UFI. Check that your existing element shares the same GAS 3/4 inch female bottom thread and overall dimensions of 209 mm height and 96 mm outer diameter.
The filter media is made of inorganic microfibres that capture particles down to 25 µm in size. This rating ensures effective removal of harmful contaminants while allowing adequate oil flow.
The filter features a GAS 3/4 inch female bottom thread. Its total height is 209 mm and the outer diameter is 96 mm, so it fits standard housings designed for these measurements.
No, this is an aftermarket filter engineered to match OEM specifications. It is not a genuine part from any of the cross referenced brands, but it provides an equivalent fit and performance at a lower price.
Installation follows typical spin on or cartridge style replacement. Clean the housing mating surface, lubricate the new gasket lightly, and thread the filter on by hand until the seal contacts, then tighten as recommended. Always check for leaks after restarting the system.
We offer worldwide shipping with tracking on every order. Your purchase is supported by a 30 day money back guarantee and our price beat guarantee. Contact us for any specific shipping queries.
