No Products in the Cart
| Burst Pressure | 17 bar (247 PSI) |
| Element Collapse pressure | 10 bar (145 PSI) |
| Filtration Media | Inorganic Microfibers 5 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 5 µm |
| Total Height | 226 mm (8 29/32") |
| Thread | GAS 1.1/4 inch Female Bottom |
| Type | GAS |
| Thread Size | 1.1/4 inch |
| Orientation | Female |
| Position | Bottom |
| Bypass Valve Opening Pressure | 1.75 bar (25 PSI) |
| Working Pressure | 12 bar (174 PSI) |
| Outer Diameter | 127 mm (5") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Epe | 7R130H3LLP |
| Fai Filtri | CTT-150-0-3-A03-A |
| Filtrec | A221G03BM |
| Omt | CSM15FNR |
| Oxfil | OF.8846 |
| Sofima (UFI) | CA302EFT1M |
| Sofima (UFI) | CA302FT1BM |
| Sofima (UFI) | CCA302EFT1M |
| Sofima (UFI) | CCA302FT1BM |
| Sofima (UFI) | ERC22NFA |
| Spare Part Mart | SPM-OIL-1403 |
| UFI | ERC22NFA |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-OIL-1403.
High-pressure industrial hydraulics
In systems running up to 12 bar working pressure, this filter prevents particle-induced wear on precision components. The 1.75 bar bypass valve ensures oil flow continues during cold starts without starving the pump.
Dusty or contaminated environments
When equipment operates in agricultural, construction, or mining settings, airborne dust quickly loads up filters. The 5 µm inorganic microfibers media holds more dirt than standard cellulose, extending service intervals and reducing downtime.
Consolidating filter inventories
One this filter replaces multiple branded part numbers from Epe, Fai Filtri, Filtrec, Omt, Oxfil, Sofima, and UFI. Maintenance teams can stock fewer SKUs and still cover a wide fleet of compatible machines.
Scheduled maintenance programmes
As a direct-fit replacement, this filter drops into regular service routines without adaptors or modifications. Its robust construction withstands repeated cold-start cycles, suiting preventive maintenance schedules in continuous-duty operations.
Confirm your existing filter uses a GAS 1.1/4 inch female bottom thread and matches the key dimensions: total height 226 mm and outer diameter 127 mm. This filter directly replaces units from Epe, Fai Filtri, Filtrec, Omt, Oxfil, Sofima, and UFI. Always verify your machine manual or the old filter markings before ordering.
This filter uses inorganic microfibers media with a nominal rating of 5 µm. This media type is effective at capturing fine particles that cause abrasive wear in hydraulic and lubrication systems, without restricting flow excessively.
The filter features a GAS 1.1/4 inch female bottom thread. Total height is 226 mm and outer diameter is 127 mm. The thread type, orientation, and dimensions are critical for correct sealing and bypass valve operation, so match these to your housing.
No. This is an aftermarket oil filter, manufactured as a direct replacement for filters from Epe, Fai Filtri, Filtrec, Omt, Oxfil, Sofima, and UFI. It is built to match the original specifications for fit, pressure ratings, and filtration efficiency at a more affordable price.
Remove the old filter, clean the housing sealing surface, and lubricate the new filter’s gasket with clean oil. Spin the filter on by hand until the gasket contacts the base, then tighten according to your equipment manufacturer’s guidelines. Start the engine and check for leaks.
Spare Part Mart offers worldwide shipping with tracking. Every order is covered by a 30-day money-back guarantee. We also provide a price-beat guarantee: if you find the same filter cheaper elsewhere, we will beat that price.
