No Products in the Cart
| Burst Pressure | 21 bar (305 PSI) |
| Element Collapse pressure | 10 bar (145 PSI) |
| Filtration Media | Inorganic Microfibers 25 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 25 µm |
| Total Height | 145 mm (5 23/32") |
| Thread | UNF 1 inch Female Bottom 12 |
| Type | UNF |
| Thread Size | 1 inch |
| Orientation | Female |
| Position | Bottom |
| Threads per inch | 12 |
| Working Pressure | 12 bar (174 PSI) |
| Outer Diameter | 95.5 mm (3 3/4") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Baldwin | BT8501MPG |
| Bobcat | 1A9162 |
| Cim-Tek | 70140 |
| Dixie Chopper | 60105 |
| Dixie Chopper | 68140 |
| Dixon | 7252 |
| Fai Filtri | CS-050-3-0-A25-A |
| Fairey Arlon | FA35CC25 |
| Fleetguard | HF6504 |
| Fleetguard | HF6532 |
| Fleetguard | HF7608 |
| Fleetguard-ST | ST6504 |
| Fleetguard-ST | ST6532 |
| Fram | P7531 |
| Genie | 49815 |
| Hycon | MFE8020BN2 |
| Hydac | 0080MA020BN |
| Hydac | 0080MU020BN |
| Hydac | MFE0080MU020BN2 |
| Imer | 040565 |
| John Deere | RE17380 |
| Lha | SPE1525BTA12 |
| Mtd | 7230405 |
| New Holland (CNH) | 829528C1 |
| New Holland (CNH) | 86597474 |
| Oxfil | OF.8495 |
| Parker Parfit | 926543 |
| Parker Parfit | 928764 |
| Parker Parfit | 929323 |
| PTI | F4E030JCB |
| Sofima (UFI) | CA151AFV1 |
| Sofima (UFI) | CCA151AFV1 |
| Spare Part Mart | SPM-OIL-1270 |
| Stauff | SF6504 |
| Toro | 863010 |
| Zinga | ZAE25 |
| Zinga | ZAE25P |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-OIL-1270.
Hydraulic System Protection
In hydraulic systems operating under high pressure, this filter traps fine particles down to 25 µm, preventing wear on pumps, valves, and actuators. Its 12 bar working pressure rating makes it suitable for continuous-duty applications in construction and agricultural machinery.
Extended Oil Change Intervals
The high dirt-holding capacity of the inorganic microfibers media allows for longer intervals between filter changes. This reduces maintenance downtime and lowers overall operating costs for fleet operators.
Cold Start Performance
With a collapse pressure of 10 bar, the filter element withstands pressure surges during cold starts, ensuring consistent filtration even in low-temperature environments. This is critical for equipment used in northern climates or winter operations.
Inventory Consolidation
This single filter cross-references multiple brands, allowing workshops to stock one part for various machines from Bobcat, John Deere, and New Holland. This simplifies inventory management and reduces the risk of stocking incorrect filters.
Check your equipment's oil filter specifications for a UNF 1-inch female bottom thread with 12 threads per inch. The total height is 145 mm and outer diameter is 95.5 mm. This filter is compatible with machines from Bobcat, Hydac, Imer, John Deere, and New Holland (CNH) that use these dimensions.
The filter uses inorganic microfibers media with a 25 µm filtration rating. This provides effective removal of particulate contaminants while maintaining good flow characteristics for hydraulic and lubrication systems.
It has a UNF 1-inch female thread at the bottom, with 12 threads per inch. The thread orientation is female and positioned at the bottom of the filter.
This is an aftermarket filter, not an OEM part. It is built to match OEM specifications and serves as a direct replacement for filters from brands like Baldwin, Fram, Fleetguard, and John Deere.
Installation is straightforward: apply a thin film of clean oil to the gasket, screw the filter on by hand until the gasket contacts the mounting surface, then tighten an additional 3/4 to 1 turn. Do not use a filter wrench for installation unless specified.
We offer worldwide shipping with tracking. Your purchase is covered by a 30-day money-back guarantee and our price-beat guarantee ensures you get the best value.
Orders typically require 1–3 business days for processing. During this time, we confirm product availability and prepare the shipment for consolidation.
We offer two shipping tiers designed to meet your operational needs. The exact costs for all shipping options will be displayed at checkout.
Express Shipping (UPS, DHL, etc.)
Ideal for urgent needs. Estimated delivery time is typically 3–5 business days after processing.
Economy Shipping
Our standard, cost-effective option. Estimated delivery time is typically 5–10 business days after processing.
Shipping costs are calculated at checkout based on your location and selected shipping method.
Once your order ships, you'll receive a tracking number via email so you can monitor your delivery.
For detailed delivery information and FAQs, please visit our Delivery Information page or contact us.

