No Products in the Cart
| Body Height | 343 mm (13 1/2") |
| Height-1 | 48 mm (1 7/8") |
| Height-2 | 22 mm (7/8") |
| Total Height | 413 mm (16 1/4") |
| Product Net Weight | 0.41 kg (0.9 lbs) |
| Largest Inner Diameter | 40 mm (1 9/16") |
| Smallest Inner Diameter | 5 mm (3/16") |
| Outer Diameter | 83 mm (3 9/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Air-Tec | SP120050 |
| Atlas Copco | 1622365200 |
| Atlas Copco | 1622365280 |
| Atlas Copco | 1625840200 |
| Atlas Copco | 2901194401 (2/4) |
| Atlas Copco | 2901194402 (2/4) |
| Fai Filtri | CF-001-7-0863 |
| HiFi Filter | SDO201306211529 (2/4) |
| HiFi Filter | SH 62169 |
| Mann-Filter / Mann & Hummel | HU 864/1 |
| Noitech | NK 100012 (2/4) |
| Noitech | NO 100990 |
| Oxfil | HF.9046 |
| Sotras | SH 8267 |
| Sotras | SH 8331 |
| Sotras | SK 0221 (2/4) |
| Spare Part Mart | SPM-HYD-1002 |
| T.G. Filter | TGO 601 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-HYD-1002.
Dusty or Contaminated Environments
In operations where airborne dust or process debris threatens hydraulic oil quality, this filter provides effective contaminant capture. Its robust construction helps extend component life under challenging conditions, reducing unexpected downtime.
Continuous Duty Compressor Operations
For facilities running compressors around the clock, consistent filtration is vital. This filter supports long service intervals, allowing planned maintenance scheduling without compromising oil cleanliness during extended runs.
Fleet Maintenance Standardisation
When servicing multiple Atlas Copco units, using a single reliable aftermarket filter simplifies inventory management. This filter fits several popular models, cutting your spares stock and purchasing complexity.
Planned Maintenance Programmes
Incorporating this filter into routine servicing helps uphold system integrity. Its direct-fit design speeds replacement, so maintenance teams can complete tasks efficiently and keep equipment running to schedule.
Check your existing filter’s part number against the cross-references listed. This filter replaces elements from Air-Tec, Atlas Copco, Mann-Filter, and others, suiting models such as the GA 75 VSD and GA 90. If your machine is listed in our compatible models, it is a direct match.
The filtration efficiency is designed to replicate the original manufacturer’s performance. As an aftermarket component, we do not publish a specific micron figure, but the media and construction are produced to match the OEM specifications. Consult your equipment documentation for the exact rating requirement.
The filter has an outer diameter of 83 mm, a total height of 413 mm, and a body height of 343 mm. Its largest inner diameter is 40 mm and the smallest is 5 mm. Please verify these against your existing element to guarantee a precise fit.
No, this is an aftermarket direct replacement supplied by Spare Part Mart. It is not a genuine or OEM branded filter, but it is built to suit the same housings and provide comparable filtration at a lower cost.
Replacing the filter follows standard hydraulic procedures. Isolate the system, depressurise, unscrew the old element, and install the new one, ensuring the seal is seated correctly. Always refer to your machine manual for specific torque values and venting instructions.
Every this filter is covered by our 30-day money-back guarantee and price-beat promise. We ship worldwide with tracking, providing secure packaging to ensure your filter arrives in perfect condition.
