No Products in the Cart
| Burst Pressure | 55 bar (798 PSI) |
| Element Collapse pressure | 15 bar (218 PSI) |
| Filtration Media | Inorganic Microfibers 7 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 7 µm |
| Total Height | 295 mm (11 5/8") |
| Thread | UN 1.3/4 inch Female Bottom 12 |
| Type | UN |
| Thread Size | 1.3/4 inch |
| Orientation | Female |
| Position | Bottom |
| Working Pressure | 25 bar (363 PSI) |
| Outer Diameter | 117 mm (4 19/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Atlas Copco | 5541230800 |
| Baldwin | BT8878MPG |
| Caterpillar | 1261817 |
| Comox | 99280010 |
| Donaldson | P165675 |
| Donaldson | P167153 |
| Donaldson | P169399 |
| Fai Filtri | CSD-400-0-0-A06-A |
| Fleetguard | HF35438 |
| Fram | P8447 |
| Fram | P8519 |
| Gehl | P220700 |
| Hengst | H307W |
| HiFi Filter SH | 66659 |
| Ikron | HEK5030295ASFG0006B |
| John Deere | RE38987 |
| Luberfiner | 45543 |
| Luberfiner | LFH8705 |
| Mann-Filter / Mann & Hummel | WH12571 |
| New Holland (CNH) | 9821388 |
| Oxfil | OF.8659 |
| Parker Parfit | 944038Q |
| Spare Part Mart | SPM-OIL-1328 |
| Toro | 866110 |
| Uniflux | XH817 |
| WIX | 57084 |
| WIX | 57418 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-OIL-1328.
High-dust environments
On construction or mining sites, fine airborne dust can enter the oil and accelerate wear. The 7-micron inorganic microfibre media captures these abrasive particles, protecting critical components and extending oil drain intervals.
Continuous-duty operations
For machinery that runs around the clock, this filter's 25 bar working pressure and 55 bar burst rating maintain consistent oil flow and filtration, reducing the risk of unplanned downtime and keeping your operation productive.
Fleet maintenance simplification
Standardising on the SPM-OIL-1328 across multiple equipment brands minimises inventory complexity. One filter number covers Atlas Copco, Caterpillar, John Deere and New Holland machines, cutting stock costs and technician training time.
Preventive maintenance scheduling
Replacing this filter at regular service intervals prevents sludge accumulation and hydraulic system degradation. A clean oil circuit runs cooler and more efficiently, lowering fuel consumption and long-term repair expenses.
It is designed for oil systems on Atlas Copco, Caterpillar, John Deere and New Holland equipment. For a sure fit, measure your existing filter: the SPM-OIL-1328 has a 295 mm total height, 117 mm outer diameter and a UN 1.3/4-inch female bottom thread. Always compare dimensions before ordering.
The filtration media is Inorganic Microfibers with an absolute rating of 7 microns. This means it removes 98% or more of particles at that size, including most wear-causing contaminants like silicon dust and metallic wear debris.
It uses a UN 1.3/4-inch female bottom thread with 12 threads per inch (TPI). The thread is located at the bottom of the canister, and it seals with a standard gasket against the mounting base. Always verify your housing stud matches this thread pitch.
The SPM-OIL-1328 is manufactured to match the branded filter's dimensional specifications and performance ratings. It uses equivalent Inorganic Microfibers media and is rated for the same 25 bar working pressure, giving you dependable filtration at a lower cost.
Install after depressurising the system. Spin the old filter off, clean the mounting surface, and lightly oil the new gasket before spinning it on. Tighten by hand or to a recommended torque of approximately 20-25 Nm. Never use a strap wrench for tightening.
Spare Part Mart ships worldwide with full tracking. Your order is covered by a 30-day money-back guarantee and our price-beat promise. If you find a lower delivered price from a competitor, we will beat it.
