No Products in the Cart
| Burst Pressure | 17 bar (247 PSI) |
| Element Collapse pressure | 5 bar (73 PSI) |
| Filtration Media | Impregnated Paper 25 µm |
| Media type | Impregnated Paper |
| Filtration Rating | 25 µm |
| Total Height | 177 mm (6 31/32") |
| Thread | GAS 1.1/4 inch Female Bottom |
| Type | GAS |
| Thread Size | 1.1/4 inch |
| Orientation | Female |
| Position | Bottom |
| Bypass Valve Opening Pressure | 1.75 bar (25 PSI) |
| Working Pressure | 12 bar (174 PSI) |
| Outer Diameter | 127 mm (5") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Crosland | 7509 |
| Donaldson | CAR1603 |
| Donaldson | P171636 |
| Duplomatic | FRCE112P25S |
| Epe | 7R90P25P |
| Fai Filtri | CTT-100-0-3-P25-A |
| Filtrec | A220C25BM |
| Finn Filter | FFPAV105110BP |
| JCB | 32901401 |
| Luberfiner | LH8536 |
| Manitou | 88990 |
| Mc Connel | 8401041 |
| Mc Connel | 8401062 |
| Mc Connel | 8401094 |
| Omt | CSM10BNR |
| Oxfil | OF.8845 |
| Sofima (UFI) | CA301CV1BM |
| Sofima (UFI) | CA301ECV1M |
| Sofima (UFI) | CCA301CV1BM |
| Sofima (UFI) | CCA301ECV1M |
| Sofima (UFI) | ERC21NCD |
| Sofrance | NT20P025 |
| Spare Part Mart | SPM-OIL-1395 |
| Stauff | SFCT5725ER |
| TM | 1731 |
| UCC | UC5043 |
| UCC | UC5053 |
| UFI | ERC21NCD |
| WIX | 92083E |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-OIL-1395.
Heavy-Duty Construction Work
When JCB or Manitou machines operate in dusty, debris-laden environments, the SPM-OIL-1395’s 25 micron media captures fine particles that could wear pumps and valves, extending component life and reducing unplanned downtime.
Continuous Operation Cycles
For machinery running extended shifts or multiple daily cycles, the filter’s high dirt-holding capacity and 1.75 bar bypass valve prevent premature clogging, allowing uninterrupted oil flow and consistent hydraulic performance.
Fleet Maintenance Consolidation
If your site runs several JCB and Manitou models, standardising on this filter simplifies stocking, ensures you always have the correct replacement on hand, and cuts per-unit cost compared to buying separate OEM-branded filters for each machine.
Cold Start Protection
In low-temperature conditions, oil viscosity increases. The bypass valve opens at 1.75 bar to ensure cold oil reaches critical components while the filter media gradually warms and catches contaminants, avoiding pressure spikes during startup.
This filter is designed as a direct replacement for hydraulic oil filters used in JCB and Manitou equipment. Please check your existing filter’s dimensions and thread size against the SPM-OIL-1395 specifications: 177 mm total height, 127 mm outer diameter, and a GAS 1.1/4 inch female bottom thread. If these match, it will fit your machinery.
The SPM-OIL-1395 uses impregnated paper media that delivers a 25 micron absolute filtration rating. This effectively removes harmful particles from hydraulic oil, helping to protect pumps, valves, and cylinders from premature wear.
The filter has a total height of 177 mm, an outer diameter of 127 mm, and features a GAS (BSP) 1.1/4 inch female bottom thread. Always confirm these measurements against your current housing to ensure a proper seal and secure installation.
The SPM-OIL-1395 is an aftermarket alternative, not a genuine OEM part. It is manufactured to match the performance specifications of the original, including identical media type, micron rating, burst pressure, and bypass settings. For a fraction of the cost, you receive a filter that provides the same protection for your hydraulic system.
Installation is straightforward and follows standard procedures. Remove the old filter, clean the mounting surface, lubricate the new filter’s gasket with clean oil, and spin it on by hand until the gasket contacts the housing, then tighten an additional three-quarter turn. Do not over-tighten. Always refer to your machine’s service manual for specific torque recommendations.
We provide worldwide shipping with tracking on all orders. Every SPM filter is covered by our 30-day money-back guarantee, allowing you to return it for a full refund if you are not satisfied. We also offer a price-beat guarantee, ensuring you get the best value. Delivery times vary by destination, and tracking details will be provided once dispatched.
Orders typically require 1–3 business days for processing. During this time, we confirm product availability and prepare the shipment for consolidation.
We offer two shipping tiers designed to meet your operational needs. The exact costs for all shipping options will be displayed at checkout.
Express Shipping (UPS, DHL, etc.)
Ideal for urgent needs. Estimated delivery time is typically 3–5 business days after processing.
Economy Shipping
Our standard, cost-effective option. Estimated delivery time is typically 5–10 business days after processing.
Shipping costs are calculated at checkout based on your location and selected shipping method.
Once your order ships, you'll receive a tracking number via email so you can monitor your delivery.
For detailed delivery information and FAQs, please visit our Delivery Information page or contact us.

