Aerial Lift Parts (50)

Genie 72245 is the two piece handle shell and rocker that fit over the Genie 20424 platform joystick, replacing a cracked or broken handle without changing the whole joystick. It...

Genie 61322 is the platform foot switch with harness that the operator holds down to enable the drive and boom functions. It is used on Genie S-100 to S-125 and...

Genie 227516 is the platform foot switch that the operator holds down to enable the drive and boom functions. It is used on Genie S series telescopic and Z-60/34 articulated...

SPM-ALP-2935 is the 12 volt coil that fits over a HydraForce 10 series cartridge valve stem and switches the hydraulic function. It is used on JLG trailer mounted and articulated...

JLG 4301862 is the 12 volt coil that fits over a HydraForce 10 series cartridge valve stem and switches the hydraulic function. It is used on JLG trailer mounted and...

JLG 4301612 is the 12 volt coil that fits over a HydraForce 10 series cartridge valve stem and switches the hydraulic function. It is used on JLG trailer mounted and...

Genie 122517 is the three position key selector that switches control between the platform and the ground controls, with off in the middle. It is used on Genie S-100 to...

Genie 227617 is the platform foot switch that the operator holds down to enable the drive and boom functions. It is used on Genie S and Z series boom lifts....

Skyjack 101541 is the flush mount locking paddle latch on the compartment doors. It is used on Skyjack SJ7127RT and SJ7135RT rough terrain scissor lifts. This aftermarket version is made...

JLG 4301892 is the 12 volt coil that fits over a HydraForce 10 series cartridge valve stem and switches the hydraulic function. It is used on JLG trailer mounted and...

JLG 7024565 is the drive speed sensor that reads drive motor or hub speed for the machine controller. It is used on JLG telescopic and articulated boom lifts. This aftermarket...

Haulotte 2441305250 is the platform joystick that drives and steers the machine and controls the mast on Haulotte Star mast lifts. It is used on Haulotte Star vertical mast lifts....

JLG 1001100421 is the single axis platform joystick that drives the machine and raises and lowers the mast on JLG Toucan mast lifts. It is used on JLG Toucan vertical...

JLG 4360407 is the rotary speed control potentiometer in the platform control box, which sets the drive and function speed. It is used on JLG boom lifts. This aftermarket version...

Genie 122512 is a key switch kit for the Genie S-40 S-45 S-60 S-65 S-80 S-85 Z-34-22 IC Z-30-20N Z-45-22 Z-60-34. This aftermarket version has the same mounting and electrical...

JLG 1600458 is a joystick controller for the JLG Toucan 8E, 10E and 12E vertical mast lifts. This aftermarket version has the same mounting and electrical connector as the original,...

Genie 128337 is a dc motor controller for the Genie Z-45/25J DC boom lifts. This aftermarket version has the same mounting and electrical connector as the original, so it plugs...

Genie 128334 is a dc motor controller for the Genie Z-30/20N articulated boom lifts. This aftermarket version has the same mounting and electrical connector as the original, so it plugs...

Genie 128206 is the three position maintained sealed toggle switch (DPDT) for the platform controls. It is used on Genie S and Z series boom lifts. This aftermarket version has...

JLG 4360690 is the ignition key switch with keys (replaces 8223453). It is used on JLG SkyTrak telehandlers. This aftermarket version has the same mounting and electrical connector as the...

JLG 1001091153 is the complete upper platform control box with joystick, switches and emergency stop (also listed as 0272778). It is used on JLG ES series electric scissor lifts. This...

JLG 1600308 is the platform joystick for drive, steer and lift. It is used on JLG rough terrain and electric scissor lifts. This aftermarket version has the same mounting and...

JLG 1600268 is the single axis platform joystick for drive, steer and lift. It is used on JLG E2 series electric scissor lifts. This aftermarket version has the same mounting...

Genie 105387 is the 24 volt DC pump motor. It is used on Genie GR, QS and TMZ lifts. This aftermarket version has the same mounting and electrical connector as...

Genie 128375 is the onboard 48 volt 30 amp battery charger. It is used on Genie 48 volt DC scissor and boom lifts. This aftermarket version has the same mounting...

JLG 4360345 is the control panel toggle switch (31NT3913C08 type). It is used on JLG lifts. This aftermarket version has the same mounting and electrical connector as the original, so...

Genie 128201 is the two position momentary sealed toggle switch (DPDT) for the platform controls. It is used on Genie S and Z series boom lifts. This aftermarket version has...

Genie 128202 is the three position momentary sealed toggle switch (DPDT) for the platform controls. It is used on Genie S and Z series boom lifts. This aftermarket version has...

Skyjack 103136 is the manual needle valve that lets the drive motors freewheel for towing or winching. It is used on Skyjack scissor lifts. This aftermarket valve has the same...

Genie 20780 is the 12 volt two speed throttle solenoid. It is used on Genie Z series boom lifts with Kubota DF750, DF752 or WG750 engines. This aftermarket version has...

Genie 51745 is the 12 volt engine stop solenoid. It is used on Genie rough terrain scissor lifts and the TMZ-50/30. This aftermarket version has the same mounting and electrical...

Grove 7750000085 is the 12 volt two speed throttle solenoid that sets the engine to high idle. It is used on Grove Manlift boom and scissor lifts. This aftermarket version...

Snorkel 3040174 is the 12 volt shutdown and throttle solenoid (Woodward 2001-12E2U1B1S1A type). It is used on Snorkel and UpRight lifts. This aftermarket version has the same mounting and electrical...

JLG 3740053 is the 12 volt throttle solenoid (Woodward 2001-12E2U1B1S1A type). It is used on JLG boom lifts. This aftermarket version has the same mounting and electrical connector as the...

JLG 1001212415 is the platform drive joystick (also listed as 1600318, 1001166538 and 1001118416). It is used on JLG telescopic and articulating boom lifts. This aftermarket version has the same...

JLG 1600317 is the platform drive and steer joystick (also listed as 1001129555 and 1001166539). It is used on JLG telescopic and articulating boom lifts. This aftermarket version has the...

JLG 1600273 is the single axis drive and steer joystick (also listed as 1001118418 and 1001178132). It is used on JLG electric articulating boom lifts. This aftermarket version has the...

Genie 128200 is the three position sealed toggle switch for the platform controls. It is used on Genie S and Z series boom lifts. This aftermarket version has the same...

JLG 4360331 is the control panel toggle switch (32NT3911C08 type). It is used on JLG boom lifts. This aftermarket version has the same mounting and electrical connector as the original,...

Skyjack 138225 is the dual axis platform joystick for the boom and drive functions. It is used on Skyjack articulating and telescopic boom lifts. This aftermarket version has the same...