Aftermarket turbochargers, water pumps, fuel pumps, solenoids, starters, alternators and sensors for Komatsu, Volvo, Deutz, Bobcat, Kubota, Hyundai and other machines, listed by the original part number.
JCB 20/900400 is the transmission charge pump (904 type) on the JCB backhoe loader gearbox. It is used on JCB 3CX and 4CX backhoe loaders. This aftermarket version is made...
SPM-HEP-2396 is the transmission charge pump (904 type) on the JCB backhoe loader gearbox. It is used on JCB 3CX and 4CX backhoe loaders. This aftermarket version is made to...
SPM-HEP-3143 is the 24 V heavy duty starter relay in a sealed aluminium can, with two main studs, a coil terminal and a steel mounting bracket. It is used on...
Volvo 20523391 is the 24 V heavy duty starter relay in a sealed aluminium can, with two main studs, a coil terminal and a steel mounting bracket. It is used...
SPM-HEP-3142 is the 24 V battery relay (main power relay, BR-266 type) with two main stud terminals on copper straps, two small coil terminals and a steel base plate. It...
Komatsu 08088-00000 is the 24 V battery relay (main power relay, BR-266 type) with two main stud terminals on copper straps, two small coil terminals and a steel base plate....
SPM-HEP-3141 is the 24 V starter (safety) relay in a sealed can on a two hole mounting flange, with two plug in connectors on a moulded housing. It is used...
Nikko 0-25000-9061 is the 24 V starter (safety) relay in a sealed can on a two hole mounting flange, with two plug in connectors on a moulded housing. It is...
Volvo 20367490 is the 24 V heavy duty starter relay in a sealed aluminium can, with two main studs, a coil terminal and a steel mounting bracket. It is used...
Komatsu 08088-10000 is the 24 V battery relay (main power relay, BR-266 type) with two main stud terminals on copper straps, two small coil terminals and a steel base plate....
Hitachi 8980056311 is the 24 V starter (safety) relay in a sealed can on a two hole mounting flange, with two plug in connectors on a moulded housing. It is...
Doosan 544-00007 is the 24 V starter relay with two stud terminals, a mounting bracket and a two wire lead with plug. It is used on Doosan and Daewoo DH220-5,...
Caterpillar 241-8368 is the 24 V, 100 A sealed magnetic switch (heavy duty relay) with a finned body, two stud terminals and a two pin Deutsch style lead. It is...
Komatsu 08068-00001 is the key operated battery disconnect (main power) switch with mounting flange, two brass terminal studs and key. It is used on Komatsu -8 series excavators and D65EX-16...
Caterpillar 154-3197 is the key start switch with five wire harness, sealed four way plug and two keys. It is used on Caterpillar 301 to 304 mini excavators, TH telehandlers...
Mitsubishi ME037636 is the 24 V 11 tooth starter motor with solenoid and magnetic switch. It is used on Mitsubishi 6D14 and 6D15 diesel engines, as fitted to Kobelco excavators....
Komatsu 600-863-4110 is the 24 V 10 tooth gear reduction starter motor with solenoid. It is used on Komatsu PC200-6 and PC220-6 excavators and D39E-21 / D41E dozers with the...
Yanmar 119626-77210 is the 12 V alternator with a single V belt pulley and plug-in regulator connector. It is used on Yanmar 3TNV88 and 4TNV94 engines, including Hyundai R60-5 and...
Hyundai 21Q6-42001 is the 24 V 90 A alternator with an 8 groove poly V pulley and built in regulator. It is used on Hyundai R140LC-7, R210LC-7, R225-7 and R215VS...
Caterpillar 321-8932 is the 24 V 85 A alternator with an 8 groove poly V pulley. It is used on Caterpillar 312E to 320D2 GC excavators with the C4.4 and...
Caterpillar 177-9953 is the 24 V brushless alternator with a threaded drive shaft (pulley not included), heavy duty frame. It is used on Caterpillar 320C, 320D and 325C excavators and...
Isuzu 1-81200563-0 is the 24 V engine alternator with a twin groove V belt pulley, cooling fan and regulator lead. It is used on Hitachi EX400-3 excavators and KH series...
Doosan 300506-00988 is the cab air conditioner and heater blower motor with fan wheel and housing flange. It is used on Doosan DX series excavators (DX140W to DX340LC). This aftermarket...
Hitachi XB00001057 is the cab air conditioner and heater blower motor with fan wheel and housing flange. It is used on Hitachi Zaxis -5G series excavators. This aftermarket version has...
Caterpillar 229-9137 is the cab air conditioner and heater blower motor with twin fan wheels on a through shaft. It is used on Caterpillar short tail and C series excavators...
Caterpillar 178-5484 is the cab air conditioner and heater blower motor with fan wheel and mounting flange. It is used on Caterpillar C series excavators (307C to 320C). This aftermarket...
Volvo 14631179 is the air conditioner control panel (ECC climate controller) in the cab, with fan, vent, defrost, temperature, OFF and AUTO keys. It is used on Volvo B series...
Sumitomo KHR12512 is the air conditioner control panel in the cab (fan, temperature, mode, A/C and auto keys with LCD). It is used on Sumitomo SH-5 series and Case CX-B...
Volvo 14723715 is the cab monitor (I-ECU display panel) with its mounting bracket and wiring harness. It is used on Volvo D series excavators (EC210D to EC480D). This aftermarket version...
Hyundai 21M9-30101 is the cab monitor (cluster gauge panel with rev counter, temperature and fuel gauges, LCD and mode buttons). It is used on Hyundai -9 series mini and midi...
Doosan 300426-00010B is the cab monitor (instrument panel with LCD screen and keypad) that shows the gauges, warnings and work modes. It is used on Doosan DX series excavators (DX170W...
SPM-HEP-3091 is the cab air conditioner and heater blower motor with fan wheel and housing flange. It is used on Doosan DX series excavators (DX140W to DX340LC). It replaces Doosan...
Doosan K1002206 is the cab air conditioner and heater blower motor with fan wheel and housing flange. It is used on Doosan DX series excavators (DX140W to DX340LC). This aftermarket...
SPM-HEP-3069 is the 12 V wiper motor (motor and gearbox on a mounting bracket, wiper shaft and a coiled lead with connector). It is used on Doosan Daewoo mini excavators...
Doosan 2538-9015 is the 12 V wiper motor (motor and gearbox on a mounting bracket, wiper shaft and a coiled lead with connector). It is used on Doosan Daewoo mini...
SPM-HEP-3068 is the wiper motor (motor and gearbox on mounting brackets, wiper shaft and a flying lead with connector). It is used on Doosan Daewoo Solar V series excavators. It...
Doosan 538-00009A is the wiper motor (motor and gearbox on mounting brackets, wiper shaft and a flying lead with connector). It is used on Doosan Daewoo Solar V series excavators....
SPM-HEP-3067 is the wiper motor on its mounting plate with two drive shafts and a flying lead with connector. It is used on Volvo D and E series excavators. It...
Volvo 14630974 is the wiper motor on its mounting plate with two drive shafts and a flying lead with connector. It is used on Volvo D and E series excavators....
SPM-HEP-3065 is the wiper motor (motor and gearbox with wiper shaft and a flying lead with connector, no linkage). It is used on Hyundai -7 and -9 series excavators. It...
