Aftermarket turbochargers, water pumps, fuel pumps, solenoids, starters, alternators and sensors for Komatsu, Volvo, Deutz, Bobcat, Kubota, Hyundai and other machines, listed by the original part number.
Caterpillar 216-3446 is the crankshaft / camshaft position (speed) sensor with mounting bracket and integral connector. It is used on Caterpillar 3054E, 3056E, C4.4 and C6.6 engines. This aftermarket version...
Caterpillar 125-4812 is the temperature sender (brass screw-in body with lead and connector). It is used on Caterpillar 320B to 325B excavators (3116 and 3126 engines). This aftermarket version has...
Caterpillar 266-1468 is the throttle pedal position (angle) sensor with lead and connector. It is used on Caterpillar trucks, articulated trucks and G / K series wheel loaders. This aftermarket...
Komatsu 7861-93-1811 is the hydraulic pressure sensor (stainless body with integral 3 pin connector). It is used on Komatsu -8 series excavators. This aftermarket version has the same mounting and...
Komatsu 7861-92-1610 is the hydraulic pump high pressure sensor, 49 MPa, with lead and connector. It is used on Komatsu -6 series excavators and D155AX-5 / D475A-3 dozers. This aftermarket...
Hitachi 4614912 is the throttle motor positioner sensor (position sensor on the engine throttle motor, with lead and connector). It is used on Hitachi EX-5, EX-6 and Zaxis excavators. This...
Hyundai 31NA-20080 is the hydraulic idle pressure switch (auto idle signal) with lead and connector. It is used on Hyundai -7 series excavators. This aftermarket version has the same mounting...
Doosan 2547-1015 is the engine revolution (speed) sensor with lead and connector. It is used on Doosan Daewoo DH, Solar and DX series excavators. This aftermarket version has the same...
Doosan 2547-9045 is the hydraulic pump high pressure sensor, 500 bar range (sensor type 8Z12568-500K). It is used on Doosan Daewoo DH220-5 and DH225-7 excavators. This aftermarket version has the...
Hyundai 21EA-62010 is the engine coolant temperature sensor (brass screw-in body with 2 pin connector). It is used on Hyundai -7 and -9 series excavators. This aftermarket version has the...
SPM-HEP-3000 is the hydraulic solenoid valve (screw-in cartridge with green flying lead and plug). It is used on Caterpillar H series motor graders and the D8R dozer. This aftermarket valve...
Caterpillar 186-1525 is the hydraulic solenoid valve (screw-in cartridge with green flying lead and plug). It is used on Caterpillar H series motor graders and the D8R dozer. This aftermarket...
Volvo SA8230-32080 is the hydraulic pump proportional solenoid valve (cartridge with flying lead and plug). It is used on Volvo B series excavators. This aftermarket valve has the same ports,...
Hyundai XJBN-00382 is the hydraulic pump EPPR solenoid valve (proportional cartridge with flying lead and plug). It is used on Hyundai -7 series crawler excavators. This aftermarket valve has the...
Kobelco 38553-61040 is the 24V hydraulic solenoid valve, type KWE6K-22/G24D16B (screw-in cartridge with SKM6 G24D coil). It is used on Kobelco SK200 excavators. This aftermarket valve has the same ports,...
Caterpillar 251-3268 is the hydraulic solenoid cartridge valve (screw-in, with integral connector). It is used on Caterpillar H and K series wheel loaders and M series motor graders. This aftermarket...
Caterpillar 174-4913 is the proportional pressure reducing solenoid valve (screw-in cartridge with integral connector). It is used on Caterpillar G and H series wheel loaders and forest machines. This aftermarket...
Caterpillar 3E-3748 is the solenoid cartridge valve (valve group solenoid with green flying lead and plug). It is used on Caterpillar F and G series wheel loaders, compactors and D10R...
Caterpillar 198-1515 is the hydraulic solenoid valve (screw-in cartridge with integral connector). It is used on Caterpillar D series backhoe loaders and 902 to 908 compact wheel loaders. This aftermarket...
Caterpillar 458-2950 is the hydraulic solenoid valve (screw-in cartridge with green flying lead and plug). It is used on Caterpillar H series motor graders and the D8R dozer. This aftermarket...
Caterpillar 585-9230 is the hydraulic pump proportional solenoid valve (flange mounted cartridge with integral connector). It is used on Caterpillar next generation 312 to 340 excavators. This aftermarket valve has...
Caterpillar 362-3212 is the hydraulic pump proportional solenoid valve (flange mounted cartridge with integral connector). It is used on Caterpillar mini excavators. This aftermarket valve has the same ports, mounting...
Komatsu 702-21-58100 is the hydraulic pump pilot control solenoid valve (solenoid on a valve block, with braided lead and plug). It is used on Komatsu PC200-7, PC200-8 and PC220-8 excavators....
Komatsu 702-21-07311 is the hydraulic pump solenoid valve (flange mounted, with braided lead and plug). It is used on Komatsu -7, -8 and -10 series excavators. This aftermarket valve has...
Komatsu 714-12-25220 is the transmission control solenoid valve (screw-in cartridge with flying lead and plug). It is used on Komatsu WA270 to WA480 wheel loaders. This aftermarket valve has the...
SPM-HEP-2981 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Caterpillar D2 and D3...
Caterpillar 386-3439 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Caterpillar D2 and...
Caterpillar 483-7810 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Caterpillar D2 and...
SPM-HEP-2979 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Doosan Daewoo DH -7...
Doosan 300513-00008 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Doosan Daewoo DH...
Caterpillar 247-5207 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Caterpillar 312C excavators....
Caterpillar 509-9705 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Caterpillar D2 and...
Caterpillar 132-7786 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Caterpillar 307 and...
Doosan 523-00008 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Doosan Daewoo DH...
Doosan 2523-9014 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Doosan Daewoo DH...
Hyundai 21EN-32380 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Hyundai -9 series...
Hyundai 21EN-32360 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Hyundai -9 series...
Hyundai 21EN-32300 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Hyundai -7 series...
Hyundai 21EN-32340 is the electric throttle motor (governor actuator) that moves the engine fuel lever to the speed set on the cab dial. It is used on Hyundai -9 series...
Deutz 02931479 is the full engine gasket set for the Deutz BF8M1015C eight cylinder diesel engine. This aftermarket set is made to the same shapes and sizes as the original...
Tap below and it is applied to your basket automatically, so you will not
need to type it at checkout. Check your email and confirm the address and
we will tell you when that part is due again.
