No Products in the Cart
AGT PGP51093G3LP is the double (tandem) hydraulic gear pump: the aluminium front cover with the two bolt mounting flange and splined shaft, and the two pump sections with their side ports. It is used on AGT mini skid steer loaders. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Double Hydraulic Gear Pump |
| Replaces | AGT PGP51093G3LP |
| Type | Double gear pump |
| Body | Aluminium cover |
| Machine | AGT mini skid steer loader |
| Condition | New, aftermarket |
| Stat. HS-Code | 841360 |
| Country of Manufacture | China |
| AGT Part No.(SPM Part No.) |
|---|
| PGP51093G3LP(SPM-HEP-5240) |
Slow or weak hydraulics
A worn pump loses flow and pressure: functions slow down, especially when the oil is hot.
Noise
Whining or knocking from the pump points to worn gears or pistons, or cavitation from a blocked suction line.
Contamination
Metal in the filter or oil means the pump is wearing. Replace it before debris damages valves and motors.
Fitting tips
Flush the system, change the oil and filters, fill the pump case before starting, and run at low speed first.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| Amazon (Zachager) | USD 300.92 | 3 Nov 2026 |
| SINOCMP | USD 339.00 | 3 Nov 2026 |
| Amazon (DHLMX99DR) | USD 385.95 | 3 Nov 2026 |
| Amazon (ZJSYPXB) | USD 421.44 | 3 Nov 2026 |
| eBay, aftermarket seller | USD 483.33 | 3 Nov 2026 |
| Spare Part Mart | USD 271.20 | Today |
Our price of USD 271.20 is 10% to 44% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it was made for the AGT AGT mini skid steer loader. Check the old hydraulic pump is marked PGP51093G3LP or one of the cross references, because makers change parts between serial ranges.
On the AGT AGT mini skid steer loader, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Most failures come from contamination, cavitation from a restricted inlet, or running low on fluid. Check the inlet and the fluid before fitting the new hydraulic pump.
Yes. Fill the pump and its suction line with clean fluid before the first start. Running it dry, even for a few seconds, can score it.
No. It is an aftermarket hydraulic pump made to replace the AGT PGP51093G3LP. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
