No Products in the Cart
Atlas Copco 1089059026 is the manifold mounted control air solenoid valve with a brass body and square coil. It is used on Atlas Copco air compressors. This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Solenoid Valve |
| Replaces | Atlas Copco 1089059026 |
| Type | Solenoid valve on a brass manifold block, square plug-in coil |
| Connection | Manifold (sub-base) mounting with O-ring sealed ports |
| Condition | New, aftermarket |
| Stat. HS-Code | 848180 |
| Atlas Copco Part No.(SPM Part No.) |
|---|
| 1089059026(SPM-ACP-2752) |
Compressor will not load or unload
The solenoid valve switches control air to the inlet valve. A burned coil or a stuck plunger leaves the compressor stuck loaded or unloaded. Check for voltage at the coil plug first.
Air leaking from the exhaust port
Constant air from the valve exhaust means a worn seat or dirt under the plunger. A new valve stops the leak and the wasted air.
Burned or open coil
A coil that reads open or short on a meter, or smells burned, needs replacing. Check that the supply voltage matches the coil.
Fitting tips
Isolate power and vent the compressor first. Mark the ports and wires before removing the old valve, use thread sealant or new O-rings on the connections, and check for leaks under load.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (4 aftermarket sellers) | USD 204.00 to 253.33 | 6 Oct 2026 |
| Spare Part Mart | USD 163.20 | Today |
Our price of USD 163.20 is 20% to 36% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of Atlas Copco 1089059026. It is not made by or affiliated with Atlas Copco; the Atlas Copco part number is used only to show what it replaces.
It fits machines that take Atlas Copco 1089059026. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It has the same ports, mounting and coil connector as the original. Check the coil voltage matches your old valve, mark the ports before removing it, seal the threads and check for leaks under load.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
