Direct from Specialist Manufacturers | 43,000+ Products Available | 30 day money back guarantee
Deutz 04132378 Aftermarket Fuel Injection Pump
Deutz 04132378 Aftermarket Fuel Injection Pump
Deutz 04132378 Aftermarket Fuel Injection Pump

Deutz 04132378 Aftermarket Fuel Injection Pump

$344.79 USD
  • SKU: SPM-HEP-5154-P1
  • Availability: in stock Many in stock Out of stock In-stock at manufacturer. Please add 5-10 days to shipping time
  • Weight: 3.45 kg (7.61 lb)
Members earn 344 points on this order. Join today to earn 200 points off your first order.

Deutz 04132378 is the Bosch CP4 type single piston common rail pump: cast alloy body with the mounting flange, threaded drive shaft with nut, the fuel metering unit with plug, two fuel pipe stubs and the high pressure outlet. It is used on Deutz TD2.9 and TCD2.9 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.

The same part is also sold as Bosch 0445020528 and Deutz 0445020527.

Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.

Technical properties & sizes

Specifications
Part Type Fuel Injection Pump
Replaces Bosch 0445020527
Engine Deutz TD2.9, TCD2.9 L4
Type Common rail pump (Bosch CP4)
Cross references Bosch 0445020528, Deutz 04132378
Fits Deutz TD2.9 and TCD2.9 L4 engines
Condition New, aftermarket
Stat. HS-Code 841330
Country of Manufacture China
Compatibility

Machines

Deutz TD2.9 and TCD2.9 L4 engines

Check the part number on your old unit before ordering.

Part numbers
Bosch Part No.(SPM Part No.) Fits
0445020527(SPM-HEP-5154) Deutz TD2.9 and TCD2.9 L4 engines
0445020528(SPM-HEP-5154) Deutz TD2.9 and TCD2.9 L4 engines
04132378(SPM-HEP-5154) Deutz TD2.9 and TCD2.9 L4 engines

Applications & use cases

Hard starting and low power
A worn injection pump delivers less fuel at lower pressure: long cranking and weak power under load.

Smoke and uneven running
Uneven delivery between cylinders shows as smoke and rough running.

Fuel leaks
Leaks from the pump body or shaft seal mean it is time to replace it.

Fitting tips
Set the pump timing to the engine maker's figure, bleed the fuel system, and use clean fuel and new filters.

Price beat guarantee

We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:

Seller Price Checked
eBay (4 aftermarket sellers) USD 430.99 to 448.97 2 Nov 2026
Diesel Pro USD 1,096.00 2 Nov 2026
FridayParts USD 1,574.99 2 Nov 2026
Spare Part Mart USD 344.79 Today

Our price of USD 344.79 is 20% to 78% less than these sellers.

Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.

Frequently asked questions

Will it fit my Deutz TD2.9?

Yes, it was made for the Deutz TD2.9, and 1 more listed under compatible equipment. Check the old fuel injection pump is marked 04132378 or one of the cross references, because makers change parts between serial ranges.

How often should I replace the fuel injection pump on my Deutz TD2.9?

On the Deutz TD2.9, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.

What are the signs the fuel injection pump needs replacing?

Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.

Why did the old pump fail?

Most failures come from contamination, cavitation from a restricted inlet, or running low on fluid. Check the inlet and the fluid before fitting the new fuel injection pump.

Should I prime it before starting?

Yes. Fill the pump and its suction line with clean fluid before the first start. Running it dry, even for a few seconds, can score it.

Is this a genuine Deutz 04132378?

No. It is an aftermarket fuel injection pump made to replace the Deutz 04132378. It is not made by the original manufacturer; the number only shows what it replaces.

Images and data are used as a guide and are deemed reliable to Spare Part Mart. Product may appear differently (e.g. colour) but will be as per the specs above. All cross references are deemed reliable to our knowledge. We encourage you to double check before ordering.
BACK TO TOP
Chat directly with MikeThe founder