Bosch 0445120245 is the Bosch type CRIN solenoid common rail injector with a black solenoid cap, a cast body with an angled side high pressure inlet and a slim nozzle. It is used on GAZ Sadko trucks. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Common Rail Fuel Injector |
| Replaces |
Bosch 0445120245 |
| Injector type |
Solenoid common rail (CRIN) |
| Machine |
GAZ Sadko trucks |
| Condition |
New, aftermarket |
| Stat. HS-Code |
840999 |
| Country of Manufacture |
China |
Part numbers
| Bosch Part No.(SPM Part No.)
|
|
0445120245(SPM-HEP-4894)
|
Use cases and applications
What it does
A common rail injector opens electrically several times per combustion stroke, spraying fuel at very high pressure. Its timing and flow are set by the engine controller using the trim code on its body.
Where it is used
Made for the GAZ Sadko trucks.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (6 aftermarket sellers) |
USD 82.99 to 108.00 |
1 Nov 2026 |
| FridayParts |
USD 118.52 |
1 Nov 2026 |
| SINOCMP |
USD 149.00 |
1 Nov 2026 |
| Fab Heavy Parts |
USD 221.76 |
1 Nov 2026 |
| Spare Part Mart |
USD 66.39 |
Today |
Our price of USD 66.39 is 20% to 70% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Bosch GAZ Sadko trucks?
Yes, it was made for the Bosch GAZ Sadko trucks. Check the old fuel injector is marked 0445120245 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the fuel injector on my Bosch GAZ Sadko trucks?
On the Bosch GAZ Sadko trucks, often 5,000 to 10,000 hours, but much less on poor or wet fuel. Injectors are usually changed when they fail a test, not by hours.
What are the signs the fuel injector needs replacing?
Black or white smoke, a misfire or knock on one cylinder, hard starting, higher fuel use, or a high return leak or balance rate on test.
What should I do before fitting it?
Clean the bore and seat of carbon, and keep the nozzle capped until it goes in. Torque the clamp to the engine manual, not by feel.
Does it need coding to the engine?
Most common rail injectors carry a trim code (QR or IMA) printed on the body. Enter it with a diagnostic tool after fitting, or the engine runs rough and smokes.
Is this a genuine Bosch 0445120245?
No. It is an aftermarket fuel injector made to replace the Bosch 0445120245. It is not made by the original manufacturer; the number only shows what it replaces.