No Products in the Cart
Caterpillar 3E-3748 is the solenoid cartridge valve (valve group solenoid with green flying lead and plug). It is used on Caterpillar F and G series wheel loaders, compactors and D10R / D11R dozers. This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Solenoid Valve |
| Replaces | Caterpillar 3E-3748 |
| Type | Screw-in solenoid cartridge valve with lead and connector |
| Fits | Caterpillar 950F; Caterpillar 960F; Caterpillar 966F; Caterpillar 970F; Caterpillar 980F; Caterpillar 980G; Caterpillar 988F; Caterpillar 990; Caterpillar 992D; Caterpillar 824G; Caterpillar 825G; Caterpillar 826G; Caterpillar D10R; Caterpillar D11R; Caterpillar 24H |
| Condition | New, aftermarket |
| Stat. HS-Code | 848180 |
Caterpillar machines
Check the part number on your old unit before ordering.
| Caterpillar Part No.(SPM Part No.) | Fits |
|---|---|
| 3E-3748(SPM-HEP-3002) | Caterpillar 950F, Caterpillar 960F, Caterpillar 966F, Caterpillar 970F, Caterpillar 980F, Caterpillar 980G, Caterpillar 988F, Caterpillar 990, Caterpillar 992D, Caterpillar 824G, Caterpillar 825G, Caterpillar 826G, Caterpillar D10R, Caterpillar D11R, Caterpillar 24H |
Function will not work
If a hydraulic function is dead but the pump and controls work, the solenoid cartridge or its coil is the usual suspect. Check for power at the plug first.
Drift or slow response
A worn cartridge that does not shift fully gives slow or weak movement, or lets the function creep.
Burned coil
A coil that reads open or short on a meter needs replacing; check the connector for water and corrosion first.
Fitting tips
Relieve the hydraulic pressure, clean around the valve before removing it, fit the new O rings lightly oiled and tighten to the specified torque.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (12 aftermarket sellers) | USD 67.20 to 115.00 | 6 Oct 2026 |
| SINOCMP | USD 129.00 | 6 Oct 2026 |
| Holdwell | USD 130.00 | 6 Oct 2026 |
| WDPart | USD 158.00 | 6 Oct 2026 |
| Diselmart | USD 177.00 | 6 Oct 2026 |
| MyMROmarts | USD 177.99 | 6 Oct 2026 |
| Fab Heavy Parts | USD 188.15 | 6 Oct 2026 |
| YEM Parts | USD 275.59 | 6 Oct 2026 |
| Spare Part Mart | USD 53.76 | Today |
Our price of USD 53.76 is 20% to 80% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of Caterpillar 3E-3748. It is not made by or affiliated with Caterpillar; the Caterpillar part number is used only to show what it replaces.
It fits Caterpillar 950F; Caterpillar 960F; Caterpillar 966F; Caterpillar 970F; Caterpillar 980F; Caterpillar 980G; Caterpillar 988F; Caterpillar 990; Caterpillar 992D; Caterpillar 824G; Caterpillar 825G; Caterpillar 826G; Caterpillar D10R; Caterpillar D11R; Caterpillar 24H. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It has the same ports, mounting and coil connector as the original. Check the coil voltage matches your old valve, mark the ports before removing it, seal the threads and check for leaks under load.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
