Caterpillar 420-0454 is the complete engine oil pump: the aluminium pump body cast into its mounting frame, the drive gear and the idler gear, ready to bolt in. It is used on Caterpillar C6.6 and C7.1 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Oil Pump |
| Replaces |
Caterpillar 420-0454 |
| Type |
Engine oil pump, complete with gears |
| Engine |
Caterpillar C6.6, C7.1 |
| Fits |
Caterpillar C6.6 and C7.1 engines |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Caterpillar machines
Caterpillar C6.6 and C7.1 engines
Check the part number on your old unit before ordering.
Part numbers
| Caterpillar Part No.(SPM Part No.)
|
Fits |
|
420-0454(SPM-HEP-5250)
|
Caterpillar C6.6 and C7.1 engines |
Applications & use cases
Low oil pressure
A warning light or low gauge reading with the right oil level and a good sender often means a worn oil pump.
Engine rebuilds
Fit a new oil pump whenever the engine is rebuilt or the bearings are changed. Worn gears undo a fresh rebuild.
Noise from the bottom end
Rattles at start-up while the pressure builds are a sign the pump is not priming quickly enough.
Fitting tips
Prime the pump with clean oil, fit new gaskets and O rings, and check the pickup screen before closing up.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| Amazon (QX construction machinery parts store) |
USD 150.00 |
3 Nov 2026 |
| Amazon (Fikowjs-Machinery Parts Store) |
USD 150.00 |
3 Nov 2026 |
| Amazon (FridayParts) |
USD 189.00 |
3 Nov 2026 |
| eBay, aftermarket seller |
USD 193.73 |
3 Nov 2026 |
| WDPART |
USD 212.00 |
3 Nov 2026 |
| Spare Part Mart |
USD 124.79 |
Today |
Our price of USD 124.79 is 17% to 41% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Caterpillar C6.6?
Yes, it was made for the Caterpillar C6.6, and 1 more listed under compatible equipment. Check the old oil pump is marked 420-0454 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the oil pump on my Caterpillar C6.6?
On the Caterpillar C6.6, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the oil pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
What should I do with the gasket faces?
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Should I prime it before starting?
Yes. Fill the pump and its suction line with clean fluid before the first start. Running it dry, even for a few seconds, can score it.
Is this a genuine Caterpillar 420-0454?
No. It is an aftermarket oil pump made to replace the Caterpillar 420-0454. It is not made by the original manufacturer; the number only shows what it replaces.