Cummins 3806180 is the engine coolant pump: cast iron triangle flange body, bearing and shaft, mechanical seal and impeller, with a flat pulley hub. It is used on Cummins 6CT 8.3 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as Cummins 3804883, Cummins 3802081, Cummins 3913430 and Cummins 3929615.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Water Pump |
| Replaces |
Cummins 3802081 |
| Cross references |
Cummins 3804883, Cummins 3806180, Cummins 3913430, Cummins 3929615 |
| Fits |
Cummins 6C, 6CT, 6CTA and 6CTAA 8.3 litre engines |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Cummins machines
Cummins 6C, 6CT, 6CTA and 6CTAA 8.3 litre engines
Check the part number on your old unit before ordering.
Part numbers
| Cummins Part No.(SPM Part No.)
|
Fits |
|
3802081(SPM-HEP-4487)
|
Cummins 6C, 6CT, 6CTA and 6CTAA 8.3 litre engines |
|
3804883(SPM-HEP-4487)
|
Cummins 6C, 6CT, 6CTA and 6CTAA 8.3 litre engines |
|
3806180(SPM-HEP-4487)
|
Cummins 6C, 6CT, 6CTA and 6CTAA 8.3 litre engines |
|
3913430(SPM-HEP-4487)
|
Cummins 6C, 6CT, 6CTA and 6CTAA 8.3 litre engines |
|
3929615(SPM-HEP-4487)
|
Cummins 6C, 6CT, 6CTA and 6CTAA 8.3 litre engines |
Use cases and applications
What it does
It circulates coolant through the block, head and radiator. A worn seal or bearing lets coolant out and the engine overheat.
Where it is used
Made for the Cummins 6C, 6CT, 6CTA and 6CTAA 8.3 litre engines. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (3 aftermarket sellers) |
USD 42.84 to 42.99 |
30 Oct 2026 |
| FridayParts |
USD 69.36 |
30 Oct 2026 |
| Diesel Parts Direct |
USD 143.07 |
30 Oct 2026 |
| SINOCMP |
USD 179.00 |
30 Oct 2026 |
| Spare Part Mart |
USD 35.60 |
Today |
Our price of USD 35.60 is 17% to 80% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Cummins 6C?
Yes, it was made for the Cummins 6C, and 3 more listed under compatible equipment. Check the old water pump is marked 3806180 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the water pump on my Cummins 6C?
On the Cummins 6C, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the water pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Why did the old pump fail?
Most failures come from contamination, cavitation from a restricted inlet, or running low on fluid. Check the inlet and the fluid before fitting the new water pump.
Should I change the coolant and thermostat too?
If the coolant is old or dirty, yes. Worn coolant is the usual cause of seal failure, and a new pump in old coolant fails the same way.
Is this a genuine Cummins 3806180?
No. It is an aftermarket water pump made to replace the Cummins 3806180. It is not made by the original manufacturer; the number only shows what it replaces.