Cummins 3964622 is the 24 volt fuel shutdown solenoid with a mounting flange, moulded boot, plunger with rod end and a sealed three pin plug. It is used on Cummins 5.9 litre engines. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Fuel Shutdown Solenoid 24V |
| Replaces |
Cummins 3964622 |
| Voltage |
24 V |
| Fits |
Cummins 5.9 litre engines |
| Condition |
New, aftermarket |
| Stat. HS-Code |
850590 |
| Country of Manufacture |
China |
Compatibility
Cummins machines
Cummins 5.9 litre engines
Check the part number on your old unit before ordering.
Part numbers
| Cummins Part No.(SPM Part No.)
|
Fits |
|
3964622(SPM-HEP-4690)
|
Cummins 5.9 litre engines |
Applications & use cases
Engine will not start or will not stop
A failed fuel shutoff solenoid holds the fuel off (no start) or will not cut it (no stop). Check power at the plug first.
Engine cuts out
A weak pull-in or hold coil lets the solenoid drop out under vibration and the engine stalls.
Sticking plunger
Dirt and corrosion stop the plunger moving freely. Replacing the solenoid is quicker than freeing an old one.
Fleet spares
A spare solenoid on the van turns a no-start into a quick fix on site.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay, aftermarket seller |
USD 45.86 |
31 Oct 2026 |
| SINOCMP |
USD 59.00 |
31 Oct 2026 |
| FridayParts |
USD 89.25 |
31 Oct 2026 |
| Spare Part Mart |
USD 36.18 |
Today |
Our price of USD 36.18 is 21% to 59% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my Cummins 3964622?
Yes, it is a direct replacement for the Cummins 3964622 with the same fitting.
How often should I replace the Cummins 3964622?
There is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.
What are the signs the solenoid needs replacing?
A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.
Should I grease the connector?
A little dielectric grease keeps water out of the plug on machines that work outside. Make sure the terminals are clean and tight first.
How do I test a solenoid coil?
Measure the coil resistance with a multimeter and check for supply voltage at the plug with the circuit on. An open coil reads infinite.
Is this a genuine Cummins 3964622?
No. It is an aftermarket solenoid made to replace the Cummins 3964622. It is not made by the original manufacturer; the number only shows what it replaces.